623347

Zennio Roll-ZAS Touch Controller Manual

7
Zoom out
Zoom in
Previous page
1/54
Next page
Roll-ZAS
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
7
This device does not need an additional power supply as it is entirely powered through
the KNX bus.
Figure 2 shows the element diagram of the ZAS controller.
Figure 2. ZAS. Element Diagram.
A short press on the programming button (3) will set ZAS into the programming mode,
which will make the programming LED (4) light in red.
Note: if this button is held while plugging the device into the KNX bus, ZAS will enter
the secure mode. The LED will then blink in red.
Apart from the programming button (3), and particularly once the device has been
installed or the button is not inaccessible, it will be possible to enter the programming
mode from the touch interface itself. In the factory state, after being connected to the
KNX bus and prior to any type of download, the device will show a default interface
with little functionality, which, however, will commute between pages “1” and “C”
(Configuration) by pressing the “Menu” button (upper left button). Under page “C”,
pressing button number 5 (labelled on the screen with the text “Prog. LED”) will be
totally equivalent to making use of the programming button (3).
1.- KNX connector
2.- Temperature sensor
3.- Programming button
4.- Programming LED
5.- Inputs (A/D)
6 - Magnet
7.- Touch button
8 - Display
9.- IR receiver
10. Central touch area
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Roll-ZAS Touch Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Roll-ZAS Touch Controller in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio Roll-ZAS Touch Controller

Zennio Roll-ZAS Touch Controller User Manual - German - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info