623344

Zennio InZennio Z41 Manual

22
Zoom out
Zoom in
Previous page
1/94
Next page
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
22
Note: although the DPT of this object considers a field for setting the day of
the week, Z41 calculates it from the date and therefore ignores that field.
[General] Date: 3-byte object for setting the internal date of the device, for
example, by linking it to a KNX clock. This object also allows read requests,
so the current date of the device can be checked. It is also automatically sent
after date changes made by the user from the screen itself.
[General] Scenes: send: 1-byte object through which scene run/save orders
(1 to 64 according to the KNX standard) can be sent to the bus in case any of
the boxes is configured as a scene control or as a timer.
[General] Internal Temperature: 2-byte object through which the value of
the current measurement of the built-in sensor will be sent to the bus,
according to the parameterisation (see section 3.2.4).
[General] Illumination: 1-bit object that, upon the reception of the value “1”
from the bus, will bring the backlight of the screen to the maximum level,
while the reception of the value “0” will have no effect. This maximum
illumination will last for a certain time, according to the explanation in section
2.5.
[General] Touch Lock: 1-bit object that, upon the reception of the value “1”
from the bus, will lock the touch panel so that user presses are ignored from
that moment. Touch locking will be interrupted as soon as the value “0” is
received through this object. See section 3.2.3.
During the parameter configuration, a screen similar to Figure 13 will be shown.
Figure 13 Parameter Screen shown by default
As shown in Figure 13, the parameter window is initially divided into four main tabs:
Main Configuration, which contains a few more tabs:
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio InZennio Z41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio InZennio Z41 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio InZennio Z41

Zennio InZennio Z41 User Manual - German - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info