623344

Zennio InZennio Z41 Manual

93
Zoom out
Zoom in
Previous page
1/94
Next page
KNX Capacitive Colour Touch Panel
USER MANUAL
ZN1VI-TP41C
Application Program Version: [3.3]
User Manual Version: [3.3]_b
www.zennio.com
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
2
DOCUMENT UPDATES
Version
Changes
3.3_b
Minor text revision.
-
Icon list restructuring.
-
3.3_a
Changes in the application program:
•
Push notifications on alarm events are now sent to
mobile devices.
• New function: gas/water consumption monitor.
3.1_a
Changes in the application program:
• New f
unctions: time/date periodic sending and
chrono-thermostat.
3.0_a
Changes in the application program:
•
Additional character sets (Arab, Hebrew, Chinese,
Japanese, Korean) for on-screen texts.
•
Pairing procedure for remotely controlling the
device.
• Replacement of certain icons.
•
Parameters for enabling/disabling the firmware
update function via USB or Ethernet.
•
Password protection for the firmware update via
Ethernet.
• Self-
reconnection to the IP network and to the
remote-control service with no need of rebooting the
device.
• Improvement in the graph rendering functions.
• Longer press times permitted for buttons that do not
trigger actions on long presses.
• Revision and update of communication object flags.
• Customisable function for the Reset button.
• Object name changed: “[Energy x] Cost”.
-
2.1_a
Changes in the application program:
• Parameter added for setting the attenuation of the
-
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
3
backlight (total, partial or none) on inactivity.
• Support added for TrueType fonts.
• Compatibility with Greek and Cyrillic characters.
•
Driver update to offer compatibility with newer
capacitive touch panels.
•
Minor changes in the handling of graphics, themes
and transitions between themes.
•
“Lock” icon added to the Profile and Configuration
pages when security protection has been set to
them.
• Interruption of the inactivity timeout counter if a pop-
up windows is active.
•
Unification of the text format and time spacing of
labels shown in graphical value monitoring.
2.0_a
Changes in the application program:
General improvement of the capaci
ties and functionality.
Changes in the user interface and in the page browsing.
More versatility:
• 6 general-purpose pages and 2 specific pages.
•
Possibility of implementing different controls
(climate, scenes, etc.) within the same page.
• Self-alignment of the boxes in a page (optional).
New functionality:
• RGB and RGBW controls.
• Energy consumption monitoring.
• Daily timer.
• Alarm log.
• Numerical indicator log
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
4
CONTENTS
Document Updates ....................................................................................................................... 2
Contents ........................................................................................................................................ 4
1 Introduction .......................................................................................................................... 6
1.1 InZennio Z41 .................................................................................................................. 6
1.2 Z41 3.x (and later versions) ........................................................................................... 8
1.3 Installation ..................................................................................................................... 9
1.3.1 Firmware Updates ................................................................................................ 11
2 Configuration....................................................................................................................... 13
2.1 Menu Page .................................................................................................................. 13
2.2 General-Purpose Pages ............................................................................................... 14
2.3 Profile Page ................................................................................................................. 14
2.4 Configuration Page ...................................................................................................... 16
2.5 Backlight ...................................................................................................................... 19
2.6 Page Shaping ............................................................................................................... 19
3 ETS Parameterisation .......................................................................................................... 21
3.1 Default Configuration .................................................................................................. 21
3.2 Main Configuration ..................................................................................................... 24
3.2.1 General ................................................................................................................. 24
3.2.2 Security................................................................................................................. 26
3.2.3 Touch Lock ........................................................................................................... 29
3.2.4 Internal Temperature Sensor ............................................................................... 31
3.2.5 Ethernet ............................................................................................................... 32
3.2.6 Consumption Monitor Objects ............................................................................ 33
3.2.7 White-Channel Objects ........................................................................................ 34
3.2.8 Firmware Update ................................................................................................. 34
3.3 Menu ........................................................................................................................... 36
3.3.1 Configuration ....................................................................................................... 36
3.4 Page n .......................................................................................................................... 37
3.4.1 Configuration ....................................................................................................... 37
3.4.2 Box i ...................................................................................................................... 38
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
5
3.4.2.1 Indicator ................................................................................................... 39
3.4.2.2 1-button Control ....................................................................................... 44
3.4.2.3 2-button Control ....................................................................................... 46
3.4.2.4 Climate Control ......................................................................................... 56
3.4.2.5 Other......................................................................................................... 64
3.5 Profile Page ................................................................................................................. 80
3.5.1 Configuration ....................................................................................................... 80
3.6 Configuration Page ...................................................................................................... 81
3.6.1 Configuration ....................................................................................................... 81
3.7 Thermostat n ............................................................................................................... 82
ANNEX I. Controlling Z41 Remotely via IP ................................................................................... 83
Configuring Z41 ....................................................................................................................... 83
Pairing Procedure .................................................................................................................... 84
‘Push’ Notifications ................................................................................................................. 85
Remote Applications ............................................................................................................... 87
ANNEX II. Communication Objects.............................................................................................. 88
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
6
1 INTRODUCTION
1.1 InZennio Z41
InZennio Z41 is an easily and intuitively controllable high-performance colour touch
screen. Its built-in features and functions make it the ideal solution for integral room
control in hotels, offices or any other environments where controlling climate systems,
lighting systems, shutters, scenes, etc. is required.
The most outstanding features of InZennio Z41 are:
4.1 inch backlit capacitive touch panel.
User interface with various pre-set colour patterns and themes.
Multiple direct action functions, fully customisable.
Control distribution across up to 6 customisable pages.
Full climate management.
Programmable timers.
Scene control.
Alarm control.
2 independent thermostats.
Built-in temperature sensor.
Ethernet interface for firmware updates and for the control of the device from
remote IP applications.
Elegant design, available in various colours.
Note that a major enhancement in the functionality and an innovative re-design of the
original user interface were introduced by Zennio beginning with version 2.0 of the
application program. Table 1 shows the most significant functionalities and differences
of versions 1.x, 2.x and 3.0 (or later).
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
7
Function Z41 1.x Z41 2.x 3.0 3.1
3.3
General-purpose pages
2
6 (***) 6 (***) 6 (***)
6 (***)
Specific-purpose pages (climate, scenes, timers)
4
Binary indicators (text / icon)
Enumerated indicators (text / icon)
Numerical indicators (percentage, floating point, etc.)
(**)
Chronological data log for numerical indicators
1-button controls (binary, scene, percentage, floating point, etc.)
(**)
2-button controls (binary, scene, percentage, floating point, etc.)
(**)
Climate controls
RGB controls
RGBW controls
Energy consumption monitoring
Gas/Water consumption monitoring
Daily timers
48 (*) 48 (*) 48 (*)
48 (*)
Weekly timers
16 48 (*) 48 (*) 48 (*)
48 (*)
Alarms
8 48 (*) 48 (*) 48 (*)
48 (*)
Alarm log
Remote control from mobile devices
Push notifications sent to mobile devices on alarm events
Chrono-thermostat
Periodic sending of date and time to the KNX bus
Table 1 Differences between Z41 1.x, Z41 2.x and Z41 3.x.
(*) As a maximum (making use of all boxes from all pages).
(**) Only positive numeric values.
(***) This differentiation does not apply anymore; six pages are now provided combining all the
functionalities together.
Note: this user manual will focus on the Z41 3.3 application program.
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
8
1.2 Z41 3.x (AND LATER VERSIONS)
Versions 3.3 and later of the Z41 application program feature the following functions:
6 General-Purpose Pages, with up to 8 Fully-Customisable Boxes each,
which the integrator may configure as indicators or controls.
Indicators:
o Binary (icon or text).
o Enumerated (icon or text).
o Unsigned integer (8 / 16 bits).
o Signed integer (8 / 16 bits).
o Scaling (percentage).
o Floating point (16 bits).
1-button Controls:
o Binary (preset value; switch; hold &
release; short press, long press…).
o Unsigned integer (8 / 16 bits).
o Signed integer (8 / 16 bits).
o Scaling (percentage).
o Floating point (16 bits).
o Scene (run / save).
2-button Controls:
o Binary (icon, text, number).
o Enumerated (icon, text).
o Unsigned integer (8 / 16 bits).
o Signed integer (8 / 16 bits).
o Percentage (Scaling).
o Floating point (16 bits).
o 2 scenes (run / save).
o Shutters.
o Light dimming.
Climate Specific Controls:
o Temperature setpoint control.
o Mode (cool/heat or extended).
o Special modes
o Fan.
Other Controls:
o RGB.
o RGBW.
o Energy consumption (4 Bytes).
o Daily timer.
o Weekly timer.
o Alarm.
o Chrono-thermostat
1 Profile Page (optionally), which lets the user modify, directly from the user
interface, parameters such as the brightness, contrast and colour pattern of
the screen, and the sound of the button press beeps.
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
9
1 Configuration Page (optionally), which contains the controls for setting the
time/date, for calibrating the built-in temperature probe and for pairing the
device with a remote IP application. It also shows the alarm log, the software
version and the current IP address.
Note: Z41 3.x supports Latin, Arab, Chinese, Korean, Japanese, Greek, Cyrillic and
Hebrew characters for the on-screen, customisable labels. However, only certain
combinations are possible within the same parameterisation:
Latin and Arab characters,
Latin, Chinese, Korean and Japanese characters,
Latin, Greek, Cyrillic and Hebrew characters.
1.3 INSTALLATION
Figure 1 shows the connection outline of the InZennio Z41 screen:
Figure 1 Element Diagram
The InZennio Z41 connects to the KNX bus through the built-in terminal (1). An
external DC power supply (12v / 24v / 29v) which delivers at least 150 mA of current
is also required. The KNX power and the external power must be electrically isolated
and provided by separate supplies, in order to avoid interference to the KNX bus. This
external power must be supplied to the device through the corresponding terminal (4)
provided within the original packaging, ensuring that each cable is properly connected
1.- KNX bus connection
2.- Programming button
3.- Programming LED
4.- External power input
5.- USB connection
6.- Ethernet connection
7.- Slot for the button battery
8.- Temperature sensor
9.- Magnet
5
4
8
2
1
7
3
9
6
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
10
and respecting the electrical polarities –positive and negative– from the supply to the
device.
In addition to the external supply, Z41 makes use of a button battery, located at the
corresponding slot (7), to help maintain the time and date updated in case of a failure
of the external power supply.
Note: immediately after connecting the external supply, the device will perform an
automatic calibration, which may result deviated if it takes place while any type of
pressure is being made over the front panel. In case of an unexpected behaviour in
touch recognition, it will be necessary to disconnect and connect the device back,
avoiding making pressure over the panel, in order to perform a new calibration.
After the connection of the external power supply, the screen will blink for an instant.
Approximately 7 seconds later, a welcome message containing the Zennio logo and
the “Loading…” label will be shown. Once the load process ends, the Status page will
come up (see Figure 2).
Figure 2 Status Page
This screen is divided into 8 boxes, which contain the following information:
The “KNX” box shows the individual address assigned to the screen (in case
of no assignment, this will show as “x.x.x”).
The “Software” box will show empty in absence of an application program. In
general, it will indicate if the download software is correct (“OK”) or if it is
found to be corrupt due to download issues (“ERROR”).
The “Sync” box shows, as a percentage, the progress of the internal
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
11
synchronisation of the device during the start-up. Once it reaches 100%, the
Status page will disappear and the Menu page will come up.
The “Ethernet” box shows the IP address assigned to Z41, provided that an
Ethernet cable has been attached (6) and the network is running a DHCP
server.
Last, the “SW Version” box shows the version of the application program
currently loaded to the device.
The Status page will also show up during bus failures in case the external power (12-
24-29v) is not interrupted.
Note: although the device will not turn functional until it is powered with the external
supply, the KNX bus power should be enough to perform downloads from ETS
(application program, group addresses, etc.).
A brief press on the programming button (2) will make the device enter the
programming mode. The programming LED (3) will then light in red. On the contrary,
if this button is held while the device gets connected to the bus, Z41 will enter the safe
mode. In such case, the programming LED will blink in red colour.
Connectors (5) and (6) are provided for firmware updates (see section 1.3.1) and most
likely for enhanced functionality such as remote accesses to the device.
For detailed information about the technical features of Z41, as well as on security and
installation procedures, please refer to the device Datasheet, included within the
device packaging and also available at www.zennio.com.
1.3.1 FIRMWARE UPDATES
Z41 incorporates two separate microcontrollers. One of them is focused on
interfacing with the KNX bus and on running the application program itself, while the
second one is dedicated to running the firmware that implements the operating system
and the management of the peripherals.
Therefore, an occasional update of Z41 may consist in two phases:
Downloading the new application program (from ETS),
Downloading the new firmware.
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
12
Two alternative methods are provided for the latter: the connection of a flash memory
drive to the USB slot (see 5 in Figure 1) through the proper adapter, or the connection
of an Ethernet network cable (see 6 in Figure 1). For further details on the firmware
update process, please refer to the “Z41 – USB/Ethernet firmware update” specific
document, available at www.zennio.com.
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
13
2 CONFIGURATION
2.1 MENU PAGE
The user interface of the InZennio Z41 touch screen is organised into pages (up to
eight different pages), each of which can be accessed from the Menu page, which
(unless the contrary has been parameterised) is automatically shown after the start-up.
Figure 3 Menu Page (example)
As Figure 3 shows, the access to the pages is provided by a set of icons, which may
show other (smaller) icons overlaid, such as an exclamation or a lock. Exclamations
reflect that there are active alarms (see epigraph g) in section 3.4.2.5) within the page,
while a lock reflects that the access to the page is password-protected (see section
3.2.2).
On the other hand, 6 out of the 8 pages are general-purpose pages at the entire
disposal of the integrator, who may include up to 8 controls/indicators (with different
functionalities) per page, being even possible to combine alarm, climate or any other
controls within the same page. The remaining two pages (Profile and Configuration)
are specific-purpose, as they are provided for user customisation of the device in
runtime.
The user interface permanently shows a top bar (containing the name of the current
page as well as the current time and temperature) and a button at the bottom of every
page to get back to the Menu page:
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
14
Figure 4 Menu button
2.2 GENERAL-PURPOSE PAGES
The integrator can make use of up to 6 general-purpose pages, each of which can hold
up to 8 different indicators or controls (with no restrictions for combining them) which
will show inside the pages, automatically distributed or not, according to page
parameterisation. For more details on the box distribution, refer to section 2.6.
The parameterisable controls for the general-purpose pages and their behaviour will be
described in detail in section 3.
2.3 PROFILE PAGE
The Profile page lets the final user perform certain adjustments on the visual and
audible side of the user interface:
Figure 5 Profile Page
The specific controls that can be made available for the Profile page are:
Contrast.
Brightness.
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
15
Theme: desired colour combination, among eight different options:
Figure 6 Themes
Melody: desired tune (among three different options) for the beeps emitted
on button presses or as a feedback on action executions. One more
possibility is to make these beeps silent (alarm beeps will still work).
Note that the labels of the controls in the Profile page, as well as the title of the page
itself, are customisable in ETS. Moreover, it is possible to make any of the described
controls remain hidden for the final user. These details are explained in section 3,
together with the entire parameterisation process.
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
16
2.4 CONFIGURATION PAGE
The Configuration page lets the user know or adjust certain technical values about the
device.
Figure 7 Configuration Page
The specific controls that can be made available for the Configuration page are:
Date / Time: even though the device implements two communication objects
(see section 3.1) for setting the internal time and date from an external
device, they can also be adjusted (if such option has been enabled by
parameter) directly from the user interface. Therefore, by pressing this button,
a set of controls will pop up to let the user set the current hour (0-23),
minutes, day, month and year.
Figure 8 Time-Set Control
Z41 features an internal clock powered by a battery (see section 1.3),
because of which the time/date will not be lost after downloads or reboots.
Programming Button: control/indicator that shows the status of the
programming LED of the device. In particular, it permits entering/leaving the
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
17
programming mode as by pressing the actual programming button of the
device (see section 1.3) in case the rear of Z41 cannot be accessed.
Reset: holding this button for a few seconds (i.e., a long press is required)
sets the device back to a certain state, which can be set in ETS:
ETS Reset Device: similar to a device reset from ETS, with the
subsequent reset of the object values, alarm controls, timers, etc.
Z41 Reboot: simple device reset, with no data loss (zeroing).
ETS Reset Device and Z41 Reboot: the above two, combined.
Note: alarm logs, consumption logs or any other historic logs are not reset to
zero in any case (such thing takes only place after a firmware download; see
section 1.3.1). Nevertheless, a device reset from ETS does reset any
adjustment performed by the final user from the Profile and Configuration
pages (excepting the time / date, which is controlled by an internal clock).
Alarm Log: log file where alarm events will be incorporated as soon as they
occur. This centralised file may be useful when the user needs to check the
status of a set of alarm controls distributed across several pages.
Figure 9 Alarm Log
Hence, the alarm log will contain a listing, in reverse chronological order,
where the name, time and date of every alarm event will be shown. In
addition, the log will show the current status of each of them, which may be:
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
18
“ON”: the alarm is still active or has not been acknowledged by the
user.
“OK”: the user has acknowledged the alarm event, but the
corresponding object is still in the alarm state.
“OFF”: the user has acknowledged the alarm event and the
corresponding object has already left the alarm state.
For more information on alarms, see epigraph g) in section 3.4.2.5.
IP Address: in case the device has been connected to an IP network through
an Ethernet cable (see section 1.3), the IP address it has been assigned (if
any) will be shown here.
Version: indicator that shows both, the version of the device firmware (on the
left) and, next to it, the version of the application program that have been
downloaded to the device (see section 1.3.1).
Probe Calibration: control for setting a certain correction over the values
thrown by the internal temperature probe. This way, if the value of the
measurement is found to be slightly over (or below) the actual temperature
due to external factors, the final user will have the option to set an adjustment
of between -5.0ºC and +5.0ºC, in steps of 0.1ºC. In addition, it is possible to
set an initial value for such correction by parameter.
Note: any changes made on the calibration of the internal probe will be
applied beginning with the next measurement performed. Therefore, they
may not be perceived immediately.
Device Pairing: button for entering the device pairing function, which needs
to be run once on every Z41 that is intended to be controlled from a remote IP
application. See ANNEX I. Controlling Z41 Remotely via for more details
about controlling Z41 remotely.
The labels of the controls in the Configuration page, as well as the title of the page
itself, are customisable in ETS. Moreover, it is possible to make any of the described
controls stay hidden for the final user. These details are explained in section 3,
together with the entire parameterisation process.
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
19
2.5 BACKLIGHT
In order to prevent unnecessary power consumptions while the device is idle, Z41
automatically fades partially out the backlight of the screen after two minutes without
any user interaction. Next, after three more minutes of inactivity (i.e., after five minutes
of inactivity), the backlight is completely turned off. While partially or totally faded out,
any press on the screen will bring back the normal light level.
The timings for the above behaviour may differ in case a pop-up window is open, as
well as depending on the configuration set in parameters (see section 3.2.1).
2.6 PAGE SHAPING
Each of the pages of the user interface –including Menu, Profile and Configuration–
can be independently parameterised to display its control/indicator boxes statically
distributed or automatically ordered.
Static (grid) Distribution: all the 8 boxes of the page will be shown,
remaining empty those not having been assigned a function.
Figure 10 Static Distribution
Automatic Distribution: the active boxes will be dynamically ordered, so that
they make use of all the available space. The final distribution of the page will
therefore depend on the number of boxes with a function assigned.
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
20
Figure 11 Dynamic Distribution of the enabled boxes
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
21
3 ETS PARAMETERISATION
To begin with the parameterisation of InZennio Z41, once the ETS program is running it
is necessary to import the product database (Z41 application program). Next, the
device is added to the project and, after right-clicking on the name of the device, the
option “Edit parameters” must be selected to start the configuration process.
The next sections explain in depth the ETS parameterisation of the device.
Note: the amount of characters permitted for text parameters (labels, etc.) by ETS may
differ depending on whether they contain special characters (symbols, accents…)
coded with more than one byte. It is advisable to verify that these texts fit properly on
the screen, with independence of whether they reach the maximum text length allowed
by ETS or not.
Important: whenever the device is updated to a new version of the application program
from ETS, it is also necessary to update the firmware of the secondary microcontroller
(responsible for the operating system; see section 1.3.1) in case an updated version
exists. If the installed versions of the application program and the firmware do not
match, the device may not work correctly (the Software box in the Status page will
show the word “Error”).
3.1 DEFAULT CONFIGURATION
This section illustrates the default initial state of the device.
Figure 12 Default Topology
The general objects enabled by default are:
[General] Time: 3-byte object for setting the internal time of the device, for
example, by linking it to a KNX clock. This object also allows read requests,
so the current time of the device can be checked. It is also automatically sent
after time changes made by the user from the screen itself.
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
22
Note: although the DPT of this object considers a field for setting the day of
the week, Z41 calculates it from the date and therefore ignores that field.
[General] Date: 3-byte object for setting the internal date of the device, for
example, by linking it to a KNX clock. This object also allows read requests,
so the current date of the device can be checked. It is also automatically sent
after date changes made by the user from the screen itself.
[General] Scenes: send: 1-byte object through which scene run/save orders
(1 to 64 according to the KNX standard) can be sent to the bus in case any of
the boxes is configured as a scene control or as a timer.
[General] Internal Temperature: 2-byte object through which the value of
the current measurement of the built-in sensor will be sent to the bus,
according to the parameterisation (see section 3.2.4).
[General] Illumination: 1-bit object that, upon the reception of the value “1”
from the bus, will bring the backlight of the screen to the maximum level,
while the reception of the value “0” will have no effect. This maximum
illumination will last for a certain time, according to the explanation in section
2.5.
[General] Touch Lock: 1-bit object that, upon the reception of the value “1”
from the bus, will lock the touch panel so that user presses are ignored from
that moment. Touch locking will be interrupted as soon as the value “0” is
received through this object. See section 3.2.3.
During the parameter configuration, a screen similar to Figure 13 will be shown.
Figure 13 Parameter Screen shown by default
As shown in Figure 13, the parameter window is initially divided into four main tabs:
Main Configuration, which contains a few more tabs:
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
23
General,
Security,
Touch lock,
Internal temperature sensor,
Ethernet,
Energy monitor objects,
White-channel objects.
Firmware Update.
Menu, which will contain one more screen by default:
Configuration, from which it will be possible to activate and configure each
of the six general-purpose pages of the device (see section 2.2).
Profile Page, which itself will contain one more screen:
Configuration, from which it will be possible to activate and configure the
Profile page (see section 2.3).
Configuration Page, which itself will contain one more screen:
Configuration, from which it will be possible to activate and configure the
Configuration page (see section 2.4).
The following sections will detail the parameterisation process of each of the above
tabs, including the initially hidden screens, which will become visible depending on the
selected options.
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
24
3.2 MAIN CONFIGURATION
This tab is divided into multiple screens, all of which contain a set of global parameters
regarding the general functionality of the device, and therefore not specifically related
to a particular page of the user interface.
3.2.1 GENERAL
The General screen contains the following parameters:
Figure 14 General (Main Configuration)Power Supply Voltage: lets the
integrator specify the particular voltage of the external supply powering Z41.
The available values are 12 (by default), 24 and 29 volts. Selecting one
option or another will only cause an internal correction over the temperature
value measured by the built-in probe.
Default Theme (after programming): permits selecting the user interface
colour scheme (out of 8 different options) to be loaded after the ETS
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
26
letters or numbers) should be entered, so each of the characters will
represent one weekday. The default value is “MTWTFSS”, according to the
initial letters of the day names in English.
Label for “Time ON”: field that permits customising the label that will be
shown within the configuration pages of the weekly timers (see epigraph e) in
section 3.4.2.5), next to the checkbox that enables/disables the sending of
the switch-on order. The default value is “Time ON”.
Label for “Time OFF”: field that permits customising the label that will be
shown within the configuration pages of the weekly timers (see epigraph e) in
section 3.4.2.5), next to the checkbox that enables/disables the sending of
the switch-off order. The default value is “Time OFF”.
Label for “Scene”: field that permits customising the label that will be shown
within the configuration pages of the weekly timers (see epigraph e) in section
3.4.2.5), next to the checkbox that enables/disables the sending of scenes.
The default value is Scene”.
3.2.2 SECURITY
Figure 15 Security (Main Configuration)
This screen permits selecting how many security levels (one or two) will be available
for the configuration of the access to the control pages. In other words, it permits
setting one or two different passwords, so the integrator can afterwards configure
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
29
Label for “Repeat password”: message shown when the user is required
to re-type the new password. By default, “Repeat password”.
Label for “Updated”: message shown to the user as a confirmation of the
password change. By default, “Updated”.
Buttons that lead to a protected page from the Menu page (see section 2.1) will show a
little lock icon overlaid on their lower left corner.
3.2.3 TOUCH LOCK
Figure 18 Touch Lock (Main Configuration)
This screen is provided for the configuration of the “welcome” and “touch lock” objects.
By default two parameters are shown:
Touch Locking: dropdown list with the following options: “0=Touch enabled;
1=Touch disabled” (default value) and “0=Touch disabled; 1=Touch enabled”.
Depending on the selection, sending one value or another (“0” or “1”) to
object [General] Touch lock will lock/unlock the touch panel. The detailed
behaviour of this object is described in section 3.1.
Welcome Object: dropdown list with the following options: “Disabled” (default
value), “1-bit object” and “Scene”.
If “Disabled” is selected, this functionality will remain inactive. Therefore,
nothing will happen when, after a certain standby period, the user resumes
the interaction with the touch panel.
If “1-bit object” is selected, the [General] Welcome Object binary object is
enabled and two more parameters turn visible:
• Value: value (“0” or “1”) that will be sent to the bus. By default it is “1”.
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
30
• Time to Activate the Welcome Object: minimum time of inactivity (in
minutes) before a new press on the touch panel triggers the sending of
the welcome object. By default, it is 1 minute.
Figure 19 Touch Lock (Time to activate the welcome object configuration – 1 bit object)
If “Scene” is selected, the [General] Scenes: Send object, already
enabled in the beginning, will work as the welcome object. In this case, the
following two parameters come up:
• Scene Number: number of the scene (1-64) that will be sent to the bus.
The default value is “1”.
• Time to Activate the Welcome Object: minimum time of inactivity (in
minutes) before a new press on the touch panel triggers the sending of
the parameterised scene. By default, it is 1 minute.
Figure 20 Touch Lock (Time to activate the welcome object configuration - Scene)
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
31
3.2.4 INTERNAL TEMPERATURE SENSOR
Figure 21 Internal Temperature Sensor (Main Configuration)
This screen permits configuring the internal temperature sensor of the device. Three
parameters are provided for this:
Sensor Calibration: permits setting a certain correction over the values
thrown by the internal temperature probe. This way, if the value of the
measurement is found to be slightly over (or below) the actual temperature
due to external factors, it is possible to set an adjustment between -5.0ºC and
5.0ºC (0.0ºC by default), in steps of 0.1ºC. The value set here may be
optionally changed, in runtime, from the Configuration page (see section 2.4).
Sending Period: cycle time (in tens of a second) for sending the value of the
measured temperature to the bus. This sending is made through the
[General] Internal temperature object (see section 3.1), enabled by default.
The permitted values are 0 to 100 tens of a second. The value “0” (set by
default) deactivates this sending to the bus.
Send with a Temperature Change: permits performing a specific sending of
the temperature value to the bus –through the [General] Internal
Temperature object– whenever an increase or decrease greater or equal
than a certain value is detected between two consecutive measurements, no
matter if a periodic sending has been enabled or not. Such value (unsigned)
must be entered here, in terms of tenths of a degree. To avoid having this
extra sending on temperature changes, simply leave the default value (“0”).
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
32
3.2.5 ETHERNET
Figure 22 Ethernet (Main Configuration)
The Ethernet tab permits configuring the Ethernet network interface of Z41.
Therefore, from this parameter screen, it is possible to specifically enable the remote
control function (see ANNEX I. Controlling Z41 Remotely via ) by marking the Remote
Control through the Internet checkbox.
On the other hand, this window lets the integrator give a name to the device (Device
Description), so that it turns easier to identify it from the “Z41 Update” desktop
application (which may detect other Z41 devices on the same local network), provided
for performing firmware updates on Z41 through the Ethernet interface.
Finally, the IP Address Assignment parameter is reserved for future use, as Z41 is
currently only compatible with the automatic IP assignment through the DHCP protocol.
The Ethernet interface in Z41 is also intended to let the integrator update the firmware
of the device (see section 1.3.1) across a local network (alternatively, this process can
be performed through the built-in USB interface). Note, however, that the parameters
related to the firmware update (either via USB or via Ethernet) can be found in the
Firmware Update tab (see section 3.2.9).
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
93
Number
Size
I/O
Flags
Data Type (DPT)
Functional range
Name
Function
209, 213, 217,
221, 225, 229
2 Bytes I C - - W -
Currency
(non-standardized
datapoint type)
-670760.00 –
670760.00
[
Consumption X] Cost Local Currency
230, 231, 232,
233
1 Byte
I/O
C T R W U
DPT_Scaling
0% - 100%
[RGBW] White Channel X
0-100%
… 93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio InZennio Z41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio InZennio Z41 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio InZennio Z41

Zennio InZennio Z41 User Manual - German - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info