623344
11
Zoom out
Zoom in
Previous page
1/94
Next page
InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
11
synchronisation of the device during the start-up. Once it reaches 100%, the
Status page will disappear and the Menu page will come up.
The Ethernetbox shows the IP address assigned to Z41, provided that an
Ethernet cable has been attached (6) and the network is running a DHCP
server.
Last, the SW Version box shows the version of the application program
currently loaded to the device.
The Status page will also show up during bus failures in case the external power (12-
24-29v) is not interrupted.
Note: although the device will not turn functional until it is powered with the external
supply, the KNX bus power should be enough to perform downloads from ETS
(application program, group addresses, etc.).
A brief press on the programming button (2) will make the device enter the
programming mode. The programming LED (3) will then light in red. On the contrary,
if this button is held while the device gets connected to the bus, Z41 will enter the safe
mode. In such case, the programming LED will blink in red colour.
Connectors (5) and (6) are provided for firmware updates (see section 1.3.1) and most
likely for enhanced functionality such as remote accesses to the device.
For detailed information about the technical features of Z41, as well as on security and
installation procedures, please refer to the device Datasheet, included within the
device packaging and also available at www.zennio.com.
1.3.1 FIRMWARE UPDATES
Z41 incorporates two separate microcontrollers. One of them is focused on
interfacing with the KNX bus and on running the application program itself, while the
second one is dedicated to running the firmware that implements the operating system
and the management of the peripherals.
Therefore, an occasional update of Z41 may consist in two phases:
Downloading the new application program (from ETS),
Downloading the new firmware.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio InZennio Z41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio InZennio Z41 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio InZennio Z41

Zennio InZennio Z41 User Manual - German - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info