539698
36
Zoom out
Zoom in
Previous page
1/40
Next page
36
SAFETY VALVE
The vacuum cleaner is equipped with safety valve, which is located in dust compartment (bag) chamber. It opens itself, when
the sucking hose or connected accessories are completely blocked or dust bag is full of dust. When the valve is open, you can
hear characteristic uttering sound.
FULL DUST COMPARTMENT INDICATOR
Full bag indicator glowing (red colour), when the nozzle or brush is above the cleaned surface, informs us that it is necessary to
empty dust compartment.
Full bag indicator can activate also in case of blocked sucking hose or one of connected accessories. In such case, remove the
hose from front lid and clean the hose and connected accessories.
DUST COMPARTMENT
This vacuum cleaner is equipped with possibility of applying two alternative dust compartments:
Dust compartment so called ”CYKLON”.
SAFBAG dustbag.
1. „CYKLON” dust compartment assembling and removing:
Switch off the vacuum cleaner and unplug from the mains supply outlet.
Press the upper lid locking button „A” and open it upwards „B”.
Remove „CYKLON” dust compartment.
Leant eh compartment cover locker „C” and remove the cover „D”.
Empty the compartment from accumulated rubbish.
ATTENTION! After this activity check HEPA main lter and clean it or Exchange if
necessary – see item: „1. Main inlet lter – exchange.
Insert the compartment cover ”E”, Press it strong ”F” and press the locker „G”.
ATTENTION! The dust compartment must be closed thoroughly, otherwise the
dust shall get into the vacuum cleaner chamber and the suction power shall
reduce.
Place the empty compartment inside the vacuum cleaner chamber.
Lock the upper lid of the vacuum cleaner. When the lid is closed properly you will hear charac-
teristic clicking sound.
2. SAFBAG dust bag assembling and removing
Switch off the vacuum cleaner and unplug from the mains supply outlet.
Press the upper lid locking button and open it upwards (see item1).
Remove „CYKLON” dust compartment (see item1).
Place SAFBAG dust bag cardboard part inside the bag handle, which is an additional accessory, insert
the cardboard part up to the end inside handle runners „H”. The direction of dust bag assembling is indi-
cated with an arrow on the bag handle.
Place such assembled handle with SAFBAG dust bag in the runners on the front Wall of vacuum cleaner
chamber „I”.
Place the dust bag inside the chamber carefully not to jam the bag with upper lid „J”.
Lock the upper lid of the vacuum cleaner. When the lid is closed properly you will hear characteristic clicking sound.
Close the SAFBAG dust bag lid, to cover the inlet of the full bag and dispose it.
ATTENTION! Do not vacuum without CYKLON ltration pad or without the dust bag. The vacuum cleaner
is equipped with a blockade, which prevents closing the lid without inserting lter or dust bag.
FILTERS
The vacuum cleaner is equipped with lter system:
HEPA main inlet lter.
Motor protecting lter.
HEPA outlet lter.
1. Main inlet lter - exchange
This lter is a part of „CYKLON” dust compartment. In order to exchange it:
Switch off the vacuum cleaner and unplug from the mains supply outlet.
Remove and empty „CYKLON” dust compartment. See „CYKLON” dust compartment assembling and
removing.
Press two hooks of HEPA main lter „A” (on both sides of the compartment) and remove it „B”.
Clean (blow) the fold of HEPA basic lter. You can also rinse HEPA with running water.
ATTENTION! Dry the lter thoroughly after rinsing. HEPA main lter should be replaced with a new one always when it is damaged.
SAFBAG
dust bag
„Cyklon” dust
compartment
B
C
D
C
E
E
G
F
I
I
J
H
Bending
line
Cover
A
B
Horizontal storage:
insert the brush – nozzle on telescope pipe,
insert the hook located at the backside of telescope pipe inside the handle socket at the
backside at vacuum cleaner axis (under full bag indicator).
Vertical storage:
insert the brush – nozzle on telescope pipe,
insert the hook located at the backside of telescope pipe inside the handle socket at the bot-
tom of the vacuum cleaner beside front wheel.
Horizontal storage Vertical storage
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Voyager Twix 01Z014 SK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Voyager Twix 01Z014 SK in the language / languages: English, Polish as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info