539698
35
Zoom out
Zoom in
Previous page
1/40
Next page
35
Adjust the telescope sucking pipe length in desired work-
ing position (depending on user’s height) move the knob in
direction indicated by the arrows.
Gentle fabrics, small soft area
Small nozzle is good for vacuuming: small gentle surface and upholstery. We recom-
mend reducing suction power during such activity.
PREPARATION FOR OPERATION
Insert the hose into the vacuum cleaner inlet press it gently „A”. Gentle clicking sound is an evidence of proper hose
assembling. To remove the hose „B” Press two buttons” „C” at the hose ending.
Connect later ending (handle) with telescope sucking pipe.
Start up the vacuum cleaner pressing ON/OFF button at the
vacuum cleaner and adjust proper suction power with elec-
tronic regulation knob or with the knob on hose handle.
SUCTION POWER ADJUSTMENT
The vacuum cleaner is equipped with electronic power adjustment, which enables uent
power regulation. Moving the knob according to mars on the appliance shall cause in-
crease or reduction of suction power. ZELMER vacuum cleaners are also equipped with
mechanical suction adjustment on hose handle. To reduce or increase suction power it is
enough to move the knob in direction indicated by the arrow.
VACUUMING
Select proper nozzle or brush:
Soft surface – carpets and tted carpets, etc.
We recommend you to use brush-nozzle with sucking pipe and switch it for carpet clean-
ing function: hidden brush - according to the gure beside ).
Hard surface – wooden, oor, laminates, ceramic tiles, etc.
We recommend you to use brush-nozzle with brush out - according to the figure
beside .
Gaps, corners, cavities, etc.
Gap nozzle is used for vacuuming: gaps, corners, spaces and other recesses with
difcult access.
Small hard areas
Small brush his good for vacuuming small, hard areas which are im-
possible to reach with brush -nozzle. We recommend reducing suction
power during such activity.
Voyager vacuum cleaner can be used with Zelmer turbo brush
It is used for more effective vacuuming of carpets and tted carpets. Turbo brush usage signicantly increases the ef-
ciency of removing thready dirties such as: fur, hair, threads, etc. It is especially useful in ats, where animals are kept
(cat, dog) and it is usually difcult to remove all fur from carpets and tted carpets.
In case the turbo brush sucked itself onto a surface, reduce suction power moving the knob into Min direction. Moving
the knob in Max direction increases suction power.
Take care for the brush cleanness on the shaft. Remove threads or hair, etc. from the haft if necessary.
ATTENTION! Unplug before turbo brush cleaning – remove the plug form the mains supply outlet.
AFTER OPERATION
Switch off pressing ON/OFF button.
Unplug from mains supply outlet.
Rewind the cord pressing cord rewind button. Hold the plug when rewinding, do not allow the cord to get entangled
and the plug to bump the casing.
You can store the vacuum cleaner in both horizontal and vertical positions. The hose can remain tted, but please be
careful not to bend it too much.
B
A
C
C
Red symbol Yellow
symbol
Min.
Max.
Assemble selected accessory
to telescope pipe.
Take the power cord out of the vacuum cleaner casing and
connect it into the mains supply outlet.
ATTENTION! Be careful during pulling the cord out, the yellow mark on the cord
show the end of the cord.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Voyager Twix 01Z014 SK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Voyager Twix 01Z014 SK in the language / languages: English, Polish as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info