538898

Zelmer Torrido 13Z018 Manual

73
Zoom out
Zoom in
Previous page
1/76
Next page
73GW13-018_v01
20. Troubleshooting
ISSUE POSSIBLE CAUSE POSSIBLE SOLUTION
Coffee ows out from the
back of the lter handle
The lter handle (7) is not attached properly or not
tightened enough.
Make sure that the lter handle (7) is properly placed in
the brew head (5) and is maximally tightened.
There are coffee grains on the edge of the lter handle
(7).
Clean the upper edge of the lter handle (7) from coffee
and wipe the brew head (5) clean.
The brew head (5) is dirty. Wipe the brew head (5) with a wet cloth.
The brew head (5) is damaged. Contact an authorized service center.
Coffee does not ow out
No water in the water tank (1). Fill the tank (1) with water.
The water tank (1) is not properly installed.
Push the water tank (1) in making sure it is placed
correctly.
The control (13) is set to some other position, e.g.
.
Make sure that the control (13) is set to the OFF position.
The lter on the brew head (5) may be blocked. See paragraph 18 – Removing limescale.
The sieve in the lter (7) is blocked. Coffee is too nely
ground or too compressed.
Empty the sieve in the lter (7) and rinse it in running
water. Wipe the brew head (5) with a cloth.
Coffee is poured in drops
Coffee is too nely ground or too compressed.
If you use extremely ne ground coffee do not compress
it too much.
The machine is blocked by calcareous residues. See paragraph 18 – Removing limescale.
Espresso is without the
characteristic foam
Coffee is stale or dry.
Use fresh coffee. After opening a package of coffee be
sure it is stored in an airtight container.
Coffee is not compressed enough. Compress the coffee harder.
Coffee is too coarsely ground. Use properly ground coffee or change your coffee brand.
Not enough coffee in the sieve of the lter (7). See paragraph 10 – Making espresso.
The handle is loose during
the brewing process
The coffee is compressed too much. Compress the coffee more gently.
Coffee is too nely ground. Change your coffee to a more coarsely ground.
The lter handle (7) does not t tightly, as it was not
screwed hard enough.
Make sure that the lter handle (7) is properly placed in
the brew head (5) and is maximally tightened.
There are coffee grains on the edge of the lter handle
(7).
Clean the upper edge of the lter handle (7) from coffee
and wipe the brew head (5) clean.
The brew head (5) is dirty. Wipe the brew head (5) with a wet cloth.
The brew head (5) is damaged. Contact an authorized service center.
No steam doming out of
the nozzle
The steam nozzle (11) is blocked. Clean and rinse the steam nozzle (11).
Not enough foamed milk
The milk is not fresh. Make sure that the milk is fresh.
The temperature of milk is too high.
Make sure that the milk is properly cooled off before
being used.
The pot.
To achieve the best results in foaming use the stainless
steel pot delivered with the machine and as far as
possible try to cool it off and rinse it with cold water
before use.
The steam nozzle (11) is blocked. Clean and rinse the steam nozzle (11).
The milk is boiled. Try to use some fresh, cool milk.
The machine is not working
The lter on the brew head (5) may be blocked. See paragraph 18 – Removing limescale.
The machine is blocked with limescale. See paragraph 18 – Removing limescale.
Remember that in case of any other damages or issues removing them on one’s own is forbidden. Instead contact a qualied member of
a service center.
ECOLOGY – ENVIRONMENT PROTECTION
Each user can protect the natural environment. It is neither
difcult nor expensive.
In order to do it: put the cardboard packing into recycling
paper container; put the polyethylene (PE) bags into
container for plastic.
When worn out, dispose the appliance to particular disposal
centre, because of the dangerous elements of this appliance,
which can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any damages resulting
from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product any time in
order to adjust it to law regulations, norms, directives, or due to construction, trade,
aesthetic or other reasons, without notifying in advance.
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Torrido 13Z018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Torrido 13Z018 in the language / languages: English, Polish as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info