538898

Zelmer Torrido 13Z018 Manual

72
Zoom out
Zoom in
Previous page
1/76
Next page
72 GW13-018_v01
18.9. Plug the espresso machine by putting the cord into the socket.
The machine will turn on. The display panel and the power on/off
button (A) will ash. The display panel will indicate power is
on .
18.10. Push the power on/off button (A), You will hear a sound signal.
18.11. The indicator on the display panel will begin to whirl, signalizing
that the espresso machine is heating up.
18.12. When the indicator stops whirling, you will hear a sound signal
informing you that the machine is ready for use (has reached the
right temperature).
18.13. Press and hold both the coffee amount select button (C) and the
steam/hot water select button (E) for 2 seconds. The remove
limescale indicator will stop ashing , while the indicator will
start whirling informing that the process of removing limescale has
begun.
18.14. Hot water with removed limescale will pour out of the brew
head (5).
18.15. Wait before all the liquid comes out of the brew head (5). Then
remove and rinse the tank (1) with clean water.
18.16. Place an empty container under the brew head (5), so to let the hot
water ow into it.
18.17. To continue with the clearing process, ll the tank (1) with clean
water up to the maximum (MAX) level indicated on the water tank
(1). Close the cover of the water tank (1) and install it back in the
espresso machine.
18.18. Hot water will pour out of the brew head (5) (the espresso machine
rinses itself).
18.19. After the process of removing limescale hot water will stop pouring
our of the brew head (5) and the espresso machine will automatically
turn off.
18.20. Power on/off button (A) will light up and the power indicator
will ash on the display panel.
18.21. Unplug the espresso machine from the power supply.
18.22. Make sure that the espresso machine has cooled off.
18.23. Remove the water tank (1) and the drip tray (9) together with its grid
(8) from the espresso machine (Fig. 11).
18.24. Place the espresso machine upside-down and screw down the grid
to the lter head (5) by means of a tting screwdriver (Fig. 14).
18.25. Close the cover of the water tank (1), and then install the tank (1)
and the drip tray (9) with its grid (8) back into the espresso machine
(Fig. 13).
CAUTION! During the process of removing limescale all functions of
the espresso machine are disabled.
Fig. 11
Fig. 12
Fig. 13
Fig. 14
19. Cleaning and care
Always keep the espresso machine clean in order to provide high quality
of brewed coffee and extend the life-span of the machine.
1. Before you start cleaning, turn the espresso machine off and unplug it
from the power supply.
2. Make sure that the espresso machine has cooled off.
3. Do not immerse the espresso machine in water or any other liquids.
4. Do not wash any part of the espresso machine in a dishwasher.
5. Wipe the casing of the machine with a wet cloth or sponge.
6. Remove the lter handle (7) from the coffee machine and then remove
coffee grounds. Clean the lter handle (7) and the lter with a wet cloth
or sponge.
7. Dry the cleaned part on air or with the use of a cloth – do not dry them
in an oven or a microwave.
8. Remove the drip tray grid (8) and the drip tray (9) from the espresso
machine and pour water out of them. Then clean them with a wet cloth
or sponge.
9. Remove the cappuccino attachment by unscrewing it and pulling it
downwards.
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Torrido 13Z018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Torrido 13Z018 in the language / languages: English, Polish as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info