Manual Zelmer Tiny VC1400.0 SK (page 57 of 62) (English, Polish)

539694

Zoom out

Zoom in

1/62

VC1400-001_v02

The vacuum cleaner is also equipped with a mechanic

suction power controller, which is situated on the hose

handle. You may use it to slightly regulate the suction power

without the need to use the dial.

Installing/deinstalling the CYKLON dust

container

The vacuum cleaner is equipped with a removable CYKLON

dust container (which is a removable part of the vacuum

cleaner) responsible for collecting dirt. After the CYKLON

dust container is full, it has to be emptied.

 Thevacuumcleanerisequippedwithasafety

valve situatedin the chamberof the vacuum

cleaner. It opens up automatically when the

suctionhoseoranyelementsattachedtoitare

completelycloggedup,andwhentheCYKLON

dustcontainer isoverlled.Afterthe valveis

open,youwillhearacharacteristicutteringin

thevacuumcleaner.

Press the on/off button (6) to stop the vacuum cleaner.

Remove the plug of the cord from the socket.

Turn the end of the suction hose counter-clockwise, and

remove the end of the hose from the inlet of the vacuum

cleaner.

Release the fastening of the upper cover (5), and open it.

Remove the CYKLON dust container from the vacuum

cleaner. In order to do this hold the body of the vacuum

cleaner by one hand, grab the special handgrip situated on

the cover of the dust container by the other, and by holding

it like that gently remove the CYKLON dust container out of

the vacuum cleaner.

Pull the fastenings on the cover of the CYKLON dust

container aside, and remove the cover from the container.

Move the CYKLON dust container over a dustbin, and

empty its contents.

 After doing this, check the HEPA H12 basic

lter,andcleanorreplaceit,ifnecessary.

Place the cover of the CYKLON dust container on the

container in such a way that the fastening situated in the

front part of the cover is inserted into the projection of the

container. Press the back part of the cover in such a way that

the fastenings are shut tight on the body of the container.

 The CYKLON dust container has to be shut

tight. Otherwise, the suction power of the

vacuumcleanerisgoingtodrop.

Place the emptied CYKLON dust container into the

chamber of the vacuum cleaner. Close the upper cover of the

vacuum cleaner by pressing it, until you hear a characteristic

“click.”

It is necessary to empty the CYKLON dust container, if you

notice that:

a) the vacuum cleaner works less efciently,

b) the CYKLON dust container is full.

Deinstalling the lters

The vacuum cleaner is equipped with the CYKLON dust

container based on cyclone ltration, making it possible to

use the vacuum cleaner without a dust bag. A cyclone lter

uses air stream swirling to separate solid dirt. Separation

of dirt is done in an O-shaped part of the container, where

the swirling air casts away dirt on the wall of the container,

and then through the hole into the adjacent chamber of the

container. This pre-ltered air is directed into the washable

HEPA H12 conical lter stopping the tiniest fractions of dust.

A special ltration material used in the washable HEPA H12

lter makes it possible to rinse the lter with running water, if

it is dirty, and reuse it later.

At the outlet of the vacuum cleaner there is a microlter

installed.

 In case the HEPAH12 basic lter (14)or the

outlet microlter (13) are dirty, they can be

replacedwithnewones,cleanedorrinsedwith

runningwater.

  It is forbidden to wash lters in washing

machinesordishwashers.

  Filtersmaybedriedonlynaturally.

  Donotusehairdryers,heatersorradiatorsto

drylters.

 Before replacing the lters make sure the

vacuumcleanerisoff,andtheplugofthecord

isunpluggedfromthesocket.

HEPA H12 BASIC FILTER

It is necessary to periodically clean the HEPA H12 basic lter

to remove small fractions of dust.

Remove the CYKLON dust container and empty it, as

described in para. C.

Pull the fastenings on the cover of the CYKLON dust

container aside, and remove the cover from the container.

If the CYKLON dust container is full, empty it as described in

para. C.

Remove the protective casing of the HEPA H12 basic

lter out of the dust container. In order to do this turn the

protective casing of the HEPA H12 basic lter in the direction

given on the symbol „ ” (it is situated along with an arrow

on the protective casing of the HEPA H12 basic lter).

Clean, wipe, and carefully dry the casing.

●

Remove the HEPA H12 basic lter from the container

Clean the pleats of the HEPA H12 basic lter

●

(14), and

if the lter is damaged, it should be denitely replaced

with a new one. If the HEPA H12 basic lter (14) is dirty,

you may replace it with a new one, clean it or rinse it with

running water. Before reinstalling the lter, make sure it

is dry.

 Forsafetyreasonsitisunacceptabletoinstall

awetordamagedHEPAH12basiclter(14).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Tiny VC1400.0 SK in the language / languages: English, Polish as an attachment in your email.

The manual is 3,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer Tiny VC1400.0 SK Manual

Product: