Manual Zelmer Syrius (page 45 of 50) (English, Polish)

539690

Zoom out

Zoom in

1/50

1600-016_v01

a given lter: H11 lter retains 95.5% of particles with the

size of 0.3 micron and H13 lter retains as much as 99.95%

of all pollutants.

The HEPA outlet air lter needs to be replaced when the

surface of the lter is dirty or the control lamp of the outlet

lter replacement indicator lights up (9) (pulsing red light).

The suction power of the vacuum cleaner will reduce to

setting 1 when the outlet lter replacement indicator lamp

lights up.

To replace the HEPA lter lift the vacuum cleaner handle

and open the accessory compartment.

Grab the outlet lter cover (8) by the two fastenings,

press rmly with the thumbs and pull it to the outside.

Remove the HEPA lter case and replace it with a new

one. The HEPA lter ensures an effective operation of the

vacuum cleaner for about 1 year.

Insert the cover so that the two protrusions in the lower part

of the cover are inserted in the openings of the vacuum

cleaner body, press the lter cover so that the rear fastenings

snap shot on the body.

SAFBAG dust bag disassembly/assembly

The vacuum cleaner is equipped with a safety valve

which is located in the dust container (bag) chamber. It

opens automatically when the suction hose or the elements

attached to the suction hose are completely clogged or when

the dust bag is overlled with dust. After the opening of the

valve a characteristic “uttering” in the vacuum cleaner will

be heard. The opening of the safety valve will result in the

lighting of the dust bag full indicator.

When the dust bag full indicator (14) lights (with the

nozzle or the brush lifted above the cleaned surface) it means

that the bag is full and needs to be replaced. In addition the

dust bag full indicator may activate if the suction hose or the

elements attached to the suction hose are clogged.

Switch off the vacuum cleaner by pressing the “on/off”

button (2) and unplug the appliance.

Press the two side buttons on the end of the hose and

remove the hose end from the inlet opening of the vacuum

cleaner.

Release the front cover fastening (15) and open the

cover.

While holding the dust bag plate, gently bend it towards

the inside of the dust container chamber and remove the

whole dust bag upwards.

Insert the plate of the new dust bag in the tracks and

slide the plate together with the screen to the bottom of the

container, unfold the dust bag. The direction for inserting the

dust bag is indicated by the arrow on the bag.

Close the cover by pressing it until you hear

a characteristic click – pay attention not to trap the dust bag.

ZELMER vacuum cleaners are equipped with SAFBAG dust

bags in the amount indicated in the table. It is recommended

to replace the dust bag if:

a) the dust bag full indicator lights up,

b) the safety valve activates,

c) the vacuum cleaner operates poorly,

d) the dust bag is full.

Special accessories

The following special accessories may be purchased in retail

outlets:

Zelmer turbobrush (26)

May be used with all types of ZELMER vacuum cleaners. Is

used for an effective vacuuming of carpets and tted carpets.

While using the turbobrush follow the instruction manual.

The use of the turbobrush decidedly increases the

effectiveness of removing brous dirt such as: animal hair,

hair, threads etc. It is practically useful in households with

pets (cats, dogs), where removing the animal hair from the

carpets and oorings is very onerous.

Zelmer electrobrush (27)

Only the electrobrush manufactured by ZELMER may be

used with ZELMER vacuum cleaners. Using other brands of

electrobrushes may cause damage to the vacuum cleaner.

The electrobrush may be used with all ZELMER vacuum

cleaners equipped with the appropriate electrobrush socket.

While using the electrobrush follow the instruction manual.

The electrobrush is especially helpful in cleaning worn out

carpets. Before vacuuming remove all larger elements from

the oor such as: remains of cloth, paper etc. in order to

prevent blocking of the whirling element of the brush.

End of operation cleaning and

maintenance

Switch off the vacuum cleaner by pressing the “on/off”

button (2).

Unplug the appliance.

Wind the cord by pressing the cord rewind button (4).

While doing this hold the cord to make sure it is not tangled

and the plug does not hit the vacuum cleaner housing.

Press the two side buttons on the end of the hose and

remove the hose end from the inlet opening of the vacuum

cleaner.

Disconnect the telescopic tube from the nozzle or brush.

Disconnect the telescopic tube from the hose. In order to

remove the tube from the hose handle press the “A” locking

device and pull the tube in the direction of the arrow.

The vacuum cleaner may be stored horizontally. The

hose may be attached to the vacuum cleaner, however

you have to make sure that it is not excessively bent during

storing.

If necessary wipe the housing and the dust bag container

with a damp cloth (it may be soaked with dishwashing liquid)

and dry it or wipe until dry.

Donotuseabrasivedetergentsorsolvents.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Syrius in the language / languages: English, Polish as an attachment in your email.

The manual is 4,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer Syrius Manual

Product: