538894

Zelmer Supremo 13Z013 Manual

102
Zoom out
Zoom in
Previous page
1/104
Next page
102 GW13-013_v03
TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE HOW TO FIX, WHAT TO DO
Coffee runs out around the
edge of the fi lter holder
Filter holder is not inserted in the brew head properly or is not
tightened properly.
Ensure the holder is properly inserted in the brew head unit and
tightened home. See Brewing espresso – p. 97.
There are coffee particles around the fi lter rim. Clean the rim of the fi lter and wipe all coffee from the brew head.
Brew head is dirty. Wipe the brew head with a damp cloth.
Brew head is damaged. Contact an authorised service center.
Rubber seal of the head is damaged or worn out. Contact an authorised service center.
Coffee does not run through
No water in the water tank. Fill up the tank with water.
Water tank is not properly installed. Press the tank down to ensure it sits properly.
Knob is in position
.
Ensure regulator knob is in 0 position.
Filter on the brew head may be blocked. See Descaling – p. 100.
Coffee fi lter is blocked. Coffee is ground too fi nely or tamped too
fi rmly.
Empty the fi lter and rinse it under running water. Wipe the brew
head with a cloth. Clear the holes of the fi lter using the grey pin
and re-fi ll with coffee. Tamp less fi rmly.
Coffee fi lters out in drops
Coffee is ground very fi nely or tamped too fi rmly. If you use very fi nely ground coffee, do not tamp it too fi rmly.
The appliance is blocked with scale build-up. See Descaling – p. 97.
Espresso does not have charac-
teristic foam
Coffee is stale or dry.
Use fresh coffee. After opening the coffee, ensure it is stored in
a tight container.
Coffee is not tamped fi rmly enough. Tamp coffee more fi rmly.
Coffee is ground too coarsely. Use properly ground coffee or change coffee brand.
Not enough coffee in the fi lter. See Brewing espresso – p. 97.
Holder loosens during brewing
Coffee is tamped too fi rmly. Tamp ground coffee less fi rmly.
Coffee is ground too fi nely. Change to coarser coffee.
Filter holder does not sit fi rmly as it has not been tightened fi rm
enough.
Ensure coffee holder is placed correctly and tightened home in the
brew head.
See Brewing espresso – p. 97.
There are coffee particles around the fi lter rim. Clean the rim of the fi lter and clean coffee from the brew head.
Brew head is dirty. Wipe the brew head with a damp cloth.
Brew head is damaged. Contact an authorised service center.
Rubber seal of the brew head is damaged or worn out. Contact an authorised service center.
Coffee is too cold
Cups, fi lter or fi lter head are cold.
Before brewing, pre-heat cups, fi lters and holder. See Brewing
espresso – str. 97.
When making cappuccino or latte, milk is not heated enough.
Check if milk is properly heated during frothing. Ensure that milk
does not boil. See Frothing milk –p. 97.
No steam from steam wand Steam wand is blocked.
See Maintenance and cleaning – p. 100.
Not enough frothed milk
Milk is not fresh. Check if milk is fresh.
Temperature of milk is too high. Check that milk is properly cooled before use.
Jug.
To obtain best results when frothing, use the stainless steel jug
provided and cool it down or rinse with cold water if possible.
Steam wand is blocked. See Maintenance and cleaning – p. 100.
Milk has been boiled. Try to use fresh, cooled milk.
Uneven distribution of coffee
into cups
Uneven distribution or interrupted outfl ow of coffee.
Check if coffee is evenly tamped and check if anything obstructs
the outlets in the head for fi xing the fi lter.
Damaged partition in fi lter holder. Contact an authorised service center.
Espresso has burnt taste
Coffee used is unsuitable. Try other coffee brands.
Appliance was not rinsed after descaling.
Before brewing next coffee, rinse the appliance with a tankfull of
water, allow tank to empty completely.
Pump makes too much noise
No water in water tank. Fill up water tank with water.
Water tank is not properly inserted. Check if water tank is properly inserted.
Appliance does not work
Filter in brew head may be blocked.
Take out fi lter head and clean brew head unit. See Maintenance
and cleaning – p. 100.
Appliance is blocked with scale build-up. See Descaling – p. 100.
The manufacturer/importer does not accept any liability for any damages resulting
from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product any time in
order to adjust it to law regulations, norms, directives, or due to construction, trade,
aesthetic or other reasons, without notifying in advance.
ECOLOGY – ENVIRONMENT PRO TECTION
Each user can protect the natural environment. It is neither
diffi cult nor expensive.
In order to do it: put the cardboard packing into recycling
paper container; put the polyethylene (PE) bags into
container for plastic.
When worn out, dispose the appliance to particular
disposal centre, because of the dangerous elements
of this appliance, which can be hazardous for natural
environment.
Do not dispose into the domestic waste disposal!!!
… 102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Supremo 13Z013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Supremo 13Z013 in the language / languages: English, Polish as an attachment in your email.

The manual is 19,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info