538894
93
Zoom out
Zoom in
Previous page
1/104
Next page
93GW13-013_v03
OPERATION OF THE CONTROL PANEL
On/off POWER button
Turn the espresso machine on by pressing the POWER button. The
signal light below the POWER button will illuminate in red. At the same
time, illumination around the outer edge of the POWER button will ash,
which indicates that the espresso machine is in the course of reaching the
temperature required.
Warning: Before turning the espresso machine on, check that the knob on
the side of the appliance is in position 0 (off).
When the illumination of the POWER button stops ashing, it will change
to continuous light, which indicates that the espresso machine is ready for
brewing. At the same time, the outer edges around each of the MANUAL
buttons, single espresso
and double espresso buttons will light
up.
Warning: Remember that the illumination around the outer edge of the
POWER button ashes, it indicates that the espresso machine has not
reached the right temperature. Only the continuous light signals that the
machine is ready to use. To turn the espresso machine off, simply press
the POWER button.
MANUAL BUTTON
The MANUAL button allows a full control of the time of the coffee pouring
process. Use it when the espresso machine has heated up and the outer
edges of the MANUAL, single espresso and double espresso
buttons light up (continuous light). Immediately after the MANUAL button
has been pressed, the illumination around the single espresso and
the double espresso comes off. Only the POWER and MANUAL
buttons remain illuminated. The coffee pouring process will resume.
Pressing the MANUAL button again stops the coffee pouring process.
Warning: If the MANUAL button is not illuminated, and a light around the
POWER button ashes, it means the espresso machine has not reached
the required operating temperature.
SINGLE ESPRESSO
The single espresso function automatically prepares one espresso.
Tip: To prepare a single espresso, use the 1 cup lter holder (the smaller
one).
The moment the espresso machine has heated up, i.e. the MANUAL, single
espresso
and double espresso buttons light up (continuous
light), press the single espresso button. The coffee pouring process of
an espresso into 1 cup will be automatically started and nished.
For a single espresso, the appliance has been pre-programmed to
pour 60 ml of coffee.
After pressing the single espresso button, the illumination around the
MANUAL button and around the double espresso button will go
out and the coffee pouring process will resume. Only the POWER and the
single espresso buttons will be lit.
Notice: It is not necessary to press the single espresso button again to
stop the coffee pouring process. The espresso machine will stop pouring
automatically.
DOUBLE ESPRESSO
The double espresso function automatically prepares two
espressos.
Tip: To prepare two espressos, use the 2 cup lter holder (the bigger
one).
The moment the espresso machine has heated up, i.e. the MANUAL, single
espresso
and double espresso buttons light up (continuous
light), press the double espresso button. The coffee pouring
process of espresso into two cups, 60 ml each, will be automatically
started and nished.
After pressing the double espresso
button, the illumination around
the MANUAL button and the single espresso button will go out and
the coffee pouring process will resume. Only the POWER and the double
espresso buttons will be lit.
Notice: It is not necessary to press the double espresso button
again to stop the coffee pouring process. The espresso machine will stop
pouring automatically.
PROGRAM BUTTON
The PROGRAM function allows the user to set the length of the coffee
pouring time. This allows the user to programme the intensity of coffee
according to their individual taste. Using the PROGRAM function
(programming) – see PROGRAMMING THE ESPRESSO MACHINE
(p. 11).
After activating the PROGRAM function, the illumination around the
MANUAL button will go out. The POWER, the single espresso
and
the double espresso buttons, as well as the PROGRAM button
will remain lit.
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Supremo 13Z013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Supremo 13Z013 in the language / languages: English, Polish as an attachment in your email.

The manual is 19,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info