538803
41
Zoom out
Zoom in
Previous page
1/44
Next page
47SB1000-001_v01
Controls and Operation
B
PREPARING THE APPLIANCE FOR OPERATION
Wash the blender jug (5), lid (7) and stopper (9) in warm
water with washing-up liquid, rinse thoroughly and dry before
the rst use (or after the stand blender was stored unused for
a long period of time).
Be careful with the sharp blades.
CONTROL PANEL
The blender has an illuminated control panel, which goes on
after the blender jug has been mounted (the cord is plugged
into the mains socket). When the panel illumination is on, the
appliance is ready for use.
You can use “–” and “+” to select one of 5 available blade
rotation speeds. Blade rotation speed indicator shows the
selected rotation speed, displaying 1 to 5 illuminating diodes
depending on the rotation speed. Press the ON/OFF button
to run the appliance at the chosen speed.
The appliance has been equipped with quick start
programmes for user comfort. You can choose between
three programmes: “PULSE”, “ICE” and “TURBO”, using
appropriate buttons on the control panel.
ENERGY SAVING MODE
If no actions are taken for 1 minute in the stand-by mode or
when the appliance is no longer in use, the stand blender
will go to the energy saving mode (control panel illumination
goes out). If any button is pressed, the appliance will return
to the normal working mode (the control panel illumination
goes on).
CONTROLS AND OPERATION
A stand blender is designed for chopping
and mixing various kinds of products. It can
be used to prepare soups, sauces and milk
shakes, you can also mix vegetables, fruits and
meat, as well as pound cooked ingredients into
food for the infants.
1
Place the motor unit (1) on a dry, level and stable surface
near a mains socket. Make sure that the motor unit is placed
out of the reach of children.
Do not let the cord hang over the edge of a table
or work surface to prevent accidental pulling or
catching.
2
Plug the cord into the mains socket.
3
Mount the blender jug (5) onto the motor unit so that the
protruding element in the jug base ts in the cut-out in the
motor unit (1).
4
Turn the blender jug clockwise (5) to lock it in place.
5
Control panel illumination goes on.
Technical specication
Technical parameters are indicated on the nameplate of the
product.
Admissible time of uninterrupted operation: 2 minutes.
The time interval between two successive processes of
mixing: 10 minutes.
Maximum noise level: 85 dB/A.
The stand blender is built in 2nd isolation class. It does not
require connection to the socket equipped with grounding
pin.
The stand blender meets the requirements of standards in
force.
The appliance meets the requirements of the directives:
Low Voltage Device (LVD) – 2006/95/EC.
Electromagnetic compatibility (EMC) – 2004/108/EC.
The product is marked with CE mark on the nameplate.
Appliance elements
A
1
Motor unit
2
Control panel
3
Anti-slip foot
4
Cord storage compartment
5
Blender jug with level indication
6
Jug handle
7
Jug lid
8
Jug base
9
Lid stopper with level indication
10
Blade unit
11
Sealing ring
12
Grinder
13
Grinder container
14
Grinder sealing ring
15
Grinder base with blade unit
CONTROL PANEL
a
ON/OFF button
b
“–” and “+” buttons
c
“PULSE” button – enables the user to run the momentary
blending programme at a preset speed
d
“TURBO” button – enables the user to run the blending
programme at a maximum speed
e
“ICE” button enables the user to run the ice-crushing
programme
f
Blade rotation speed indicator
The number of illuminated diodes depends on a blade
rotation speed (the higher the rotation speed, the more
diodes will be on).
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer SB1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer SB1000 in the language / languages: English, Polish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zelmer SB1000

Zelmer SB1000 Additional guide - English, Polish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info