Manual Zelmer Nerro 13Z015 (page 63 of 64) (English, Polish)

538896

Zoom out

Zoom in

1/64

63GW13-022_v01

13.19. After the process completion water will stop owing through the

brew head (4). Single sound signal and ashing of the machine

indicator (C) will indicate this. The machine will automatically

turn off.

13.20. Turn the machine off at the power outlet and unplug the power

cord.

13.21. Wait until the device will cool off completely.

13.22. Take off the water tank (1) and the drip tray (8) with the grid (7) from

the espresso machine (Fig. 11).

13.23. Set the espresso machine upside down and put the lter grid again

on the lter head (4) screwing the grid with the use of an appropriate

screwdriver (Fig.14).

13.24. Set the espresso machine back on its work position and put the

drip tray (8) with the grid (7) and the water tank (1) back in the

machine (Fig.13).

ATTENTION! During the process of descaling all functions of the

machine are inactive.

14. Cleaning and care

Always keep the espresso machine clean in order to provide high quality

of brewed coffee and extend the life-span of the machine.

1. Before you start cleaning, turn the espresso machine off and unplug it

from the power supply.

2. Make sure that the espresso machine has cooled off.

3. Do not immerse the espresso machine in water or any other liquids.

4. Do not wash any part of the espresso machine in a dishwasher.

5. Wipe the casing of the machine with a wet cloth or sponge.

6. Remove the lter handle (6) from the coffee machine and then remove

coffee grounds. Clean the lter handle (6) and the lter with a wet cloth

or sponge.

7. Dry the cleaned part on air or with the use of a cloth – do not dry them

in an oven or a microwave.

8. Remove the drip tray grid (7) and the drip tray (8) from the espresso

machine and pour water out of them. Then clean them with a wet cloth

or sponge.

9. Remove the cappuccino attachment by unscrewing it and pulling it

downwards.

Fig. 11

Fig. 12

Fig. 13

Fig. 14

15. Troubleshooting

ISSUE POSSIBLE CAUSE POSSIBLE SOLUTION

Coffee ows out from the

back of the lter handle

The lter handle (6) is not attached properly or not

tightened enough.

Make sure that the lter handle (6) is properly placed in

the brew head (4) and is maximally tightened.

There are coffee grains on the edge of the lter

handle (6).

Clean the upper edge of the lter handle (6) from coffee

and wipe the brew head (4) clean.

The brew head (4) is dirty. Wipe the brew head (4) with a wet cloth.

The brew head (4) is damaged. Contact an authorized service center.

Coffee does not ow out

No water in the water tank (1). Fill the tank (1) with water.

The water tank (1) is not properly installed.

Push the water tank (1) in making sure it is placed

correctly.

The control (12) is set to some other position, e.g. .

Make sure that the control (12) is set to the OFF position.

The lter on the brew head (4) may be blocked. See paragraph 13 – Descaling.

The sieve in the lter (6) is blocked. Coffee is too nely

ground or too compressed.

Empty the sieve in the lter (6) and rinse it in running

water. Wipe the brew head (4) with a cloth.

Coffee is poured in drops

Coffee is too nely ground or too compressed.

If you use extremely ne ground coffee do not compress

it too much.

The machine is blocked by calcareous residues. See paragraph 13 – Descaling.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Nerro 13Z015 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer Nerro 13Z015 Manual

Product: