538893

Zelmer Maestro 13Z012 Manual

91
Zoom out
Zoom in
Previous page
1/94
Next page
95
Specially designated liquids or tablets. ●
Notice: For liquids and tablets, follow the instructions
shown on the packaging of these products.
Descaling the espresso machine
Warning: Ensure that the espresso machine
is switched off and the connecting cord is
disconnected from the socket.
1. Take out the water tank and rinse it clean.
Depending on the descaling agent used,
follow the steps below:
A. Espresso machine descaling tablets
Pour about 1l of warm water into the
water tank and put in a suitable number
of descaling tablets, as recommended
by the manufacturer. When the
tablets have dissolved (it takes about
5-7 minutes), replace the tank.
B. Descaling liquid
Pour about 1.5l of warm water into the
water tank. Add a suitable amount of the
descaling agent, as recommended by
the manufacturer and replace the tank.
If the lter holder is in the brew head unit, take ●
it out, rinse thoroughly under running water
and put it aside.
Using a screwdriver, unscrew the lter from ●
the bottom of the lter holder unit.
Take out the lter, the washer, the screw, and ●
the seal and put them aside in a safe place.
Important: Be careful not to lose the lter,
the washer, the screw or the seal after
disassembling the brew head unit.
Using a small delicate brush, clean the brewing ●
area of the head removing all coffee particles.
Place a sufciently big container under the ●
brew head unit.
Insert the plug of the connecting cord in the ●
mains socket and switch on the espresso
machine by pressing button .
Warning: Remember that if an inscription
saying „READY does not show on the display,
it means that the espresso machine is in the
course of reaching the operating temperature.
The moment the espresso machine has
reached the right temperature, the line of the
temperature indicator on the display will stop
ashing, symbol and an inscription saying
“READY” will show. This indicates that the
espresso machine has reached the right
temperature and is ready to use.
Turn the regulator knob to the espresso ●
position and allow half of the decaling solution
to ow through the brew head unit.
Important: Do not run the descaling solution
through the steam wand.
Warning: Depending on the size of the
container under the brew head unit, it may be
necessary to empty it during the process.
Turn the knob to position ● 0 to stop the ow
(after about half of the solution has owed
through), next press button to switch the
appliance off.
Leave the espresso machine for about 10-15 ●
minutes allowing the descaling agent to work.
Next press button ● . The espresso machine
will be switched on.
Turn the regulator knob to the espreso ●
position and allow the next portion of the
descaling solution to ow through the brew
head unit.
Take out the water tank from the appliance ●
and rinse it thoroughly under running water.
Check that all traces of the descaling solution
have been removed. Fill up the water tank
with clean water and replace it in the espresso
machine (1) (2) (3) (4) (5).
Press button ● to switch the espresso
machine on, turn the regulator knob to the
espresso position. Run all the clean water
through the head. Repeat the process twice.
Warning: Depending on the size of the
container under the brew head unit, it may be
necessary to empty it during the process.
When the process has nished, remove the ●
container from under the brew head and wipe
the whole brew head unit thoroughly.
Carefully install the rubber seal, the lter, and ●
the washer in the brew head, following their
disassembling procedure in reverse order.
Using a screwdriver, tighten the fastening
screw home.
Fill up the tank with fresh water and replace ●
it in the espresso machine. The appliance is
ready for further use.
GW13-023_v02
… 91 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Maestro 13Z012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Maestro 13Z012 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info