539647

Zelmer Aquawelt 919.5 SK Manual

62
Zoom out
Zoom in
Previous page
1/66
Next page
66
FILTER DISASSEMBLY
FOAM FILTER I
1
Open the lid of the lter unit by pulling the handle
upwards.
2
Take out the lter, wash it under running water, dry and
reinsert.
Close the lter unit lid by pressing it until you hear
●
a characteristic click.
FOAM FILTER II
It is recommended to wear rubber protective gloves while
dismantling the lter.
1
Grab the foam lter with your ngers and remove it from
the lter unit body.
2
Wash under running water, dry and reinsert.
ATTENTION! Do not hand wash the lter foam, do not
wring it, do not wash it in washing machines. Avoid
crumpling, stretching and deforming. After cleaning
dry the foam in room temperature. Never dry the foam
on heaters, stoves, etc.
INLET FILTER
1
Remove the SAFBAG (21) dust bag module from the
container.
2
Take out the SAFBAG dust bag from the module (see
chapter TRADITIONAL CLEANING WITH SAFBAG DUST
BAG -disassembly/assembly of the SAFBAG dust bag).
3
Release the fastening hook which xes the lid of the
SAFBAG dust bag module with the basket and pull the
basket aside.
4
Take out the lter, wash it under running water, dry and
reinsert.
Close the basket of the SAFBAG dust bag module by
●
pressing it until you hear a characteristic click.
Insert SAFBAG dust bag (see chapter TRADITIONAL
●
CLEANING WITH SAFBAG DUST BAG –disassembly/
assembly of the SAFBAG dust bag).
HEPA OUTLET FILTER AND COOLING AIR FILTER
The HEPA outlet lter should be replaced after about 30
hours of operation (6 months) or earlier in case of heavy dirt.
1
Slide the slider of the lter cover interlock downwards
and open the lter cover.
2
Remove and replace the HEPA lter with a new one
when the lter becomes dirty.
3
Remove and replace the motor lter with a new one
when the lter becomes dirty.
4
It is possible to rinse the HEPA lter and the cooling
air lter under running water. Remember to dry the above
mentioned lters before reassembly.
Close the lter cover and slide the interlock slider
●
upwards.
Ecology – environment protection
Each user can protect the natural environment. It is neither
difcult nor expensive.
In order to do it: put the cardboard packing into
recycling paper container; put the polyethylene
(PE) bags into container for plastic.
When worn out, dispose the appliance to
particular disposal centre, because of the
dangerous elements of this appliance, which
can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer does not accept any liability for any damages
resulting from unintended use or inappropriate handling. The
manufacturer reserves his rights for modifying the product any time
in order to adjust it to law regulations, norms, directives, or due to
construction, trade aesthetic or other reasons, without notifying it in
advance.
H
I
J
G
… 62 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Aquawelt 919.5 SK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Aquawelt 919.5 SK in the language / languages: English, Polish as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info