Manual Zelmer 986 (page 71 of 74) (English, Polish)

538959

Zoom out

Zoom in

1/74

Description (Fig. 1)

The food mincer consists of:

Mincer motor – each motor is adapted to install each

ZELMER mincing unit, citrus juicer, juicer, coffee grinder and

shredder.

The mincer unit consists of:

I. Mincer body

II. Scroll with clutch

III. Cutter

IV. Mincer screen with 4mm openings

V. Ring nut

VI. Tray

VII. Pusher

And additional accessories:

VIII. Base plate

IX. Sausage ller nozzle

X. Mincer screen with 8mm openings

XI. On/Off button.

XII. „Reverse” switch

Mechanical safety device for the motor (Fig. 2)

I. Scroll

II. Clutch

III. Screw M5x20

The mincer is equipped with a mechanical safeguard, which

protects the motor against damage – the teeth in the clutch

break when the mincer is overloaded (e.g. when bones get

inside).

Replace the damaged clutch:

twist off the screw from the scroll with the damaged clutch,

●

remove the damaged clutch,

●

attach the new clutch and tighten it with the screw.

●

„Reverse” function

The motor has a special function allowing to temporarily

change the direction of the scroll. It is used if mincing is

limited and/or if there is too much product in the mincer body

(the scroll does not take the product). Press the „R” switch

for a short period of time, the product will be removed from

the inside of the mincer body. Press the „I” button once

again to continue operation.

If the scroll is still blocked by the excess of product, use the

„R” switch once again, remove the product from the mincer

body and next remove product parts which make it difcult to

mince (e.g. sinews, etc.).

In some cases it is necessary to dismantle the mincer body

and remove the above-mentioned obstacles.

Preparing the appliance for operation and

switching on the appliance

Take out a sufcient length of the supply cord and the

appropriate accessories from the compartment.

Place the motor near the socket, on a hard, stable

●

surface. Do not cover the ventilation openings of the

housing.

Open the compartment on the back of the housing and

●

take out an appropriate screen.

A screen with 4mm openings is installed in the mincer body

as a standard.

Wash all accessories thoroughly before the initial use.

●

Assemble the appropriate accessories and install them

●

on the motor.

Plug in the appliance.

●

Switch on the appliance using the

●

„I” switch (the

appliance starts to operate after about 2 seconds).

TYPES OF ZELMER MINCERS

Typ 986

Accessories

Mincing unit Citrus juicer Shredder Juicer Quern grinder

Pasta and pastry set

(only for 986.5x)

986.50 / 986.80

● ● ● ● ●

●/

–

986.52 / 986.82

● ○ ○ ● ○

●/ –

986.53 / 986.83

● ● ● ● ○

●/

–

986.54 / 986.84

● ○ ● ○ ○

●/ –

986.56 / 986.86

● ● ● ○ ○

●/

–

986.57 / 986.87

● ● ○ ○ ○

●/

–

986.58 / 986.88

● ○ ○ ○ ○

●/

–

986.88MMSL

Mincing unit with

a metal tray and

3 screens: 2,7; 4; 8

–

○

– – –

986.84MMSL

●

● – basic accessories, ○ – additional equipment, which you can buy in shops,

–

– unavailable accessories

The mincer is equipped with one mincing unit.

The manual and the description concerning the pasta and pastry set is additionally included to mincers equipped with this set.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 986 in the language / languages: English, Polish as an attachment in your email.

The manual is 2,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer 986 Manual

Product: