539712
63
Zoom out
Zoom in
Previous page
1/68
Next page
63
SETTING THE OPERATION MODE
Setting the extraction operation mode
During the extraction mode, air is extracted to the outside with a special duct. Remove
the coal lters with this setting.
The cooker hood is connected to an opening that extracts the air to the outside with a stiff
or exible duct with the diameter of 150 or 120 mm and appropriate duct clamps which
are to be purchased in installation materials supply stores. The installation should be
performed by a qualied tter.
Setting the odor absorber operation mode
While using this mode, ltered air comes back to the room through openings on both
sides of the upper chimney. While using this mode, the coal lter should be installed, it is
also recommended to install an air exhaust n.
The speed of the fan
The lowest and medium speed settings are used in normal conditions and low cooking
fume intensity. The highest speed setting should be used only in case of an intense level
of cooking fumes e.g. during frying or grilling.
OPERATION
Control panel
The cooker hood can be controlled using
an integrated switch.
0 – motor off,
1 – rst operation speed,
2 – second operation speed,
3 – third operation speed,
– light on/off.
This adjustment allows to set the opti-
mal fan speed for the user’s needs with
a minimal noise level.
CLEANING AND MAINTENANCE
Maintenance
Regular cleaning and maintenance will guarantee a good and failure-free operation of
the cooker hood and will prolong its useful life. Make sure the aluminum lters and the
active-coal lters are replaced according to the manufacturer’s recommendations.
Anti-grease aluminum lters
1. Cleaning
In case of a normal operation of the cooker hood, the aluminum anti-grease lters
should be cleaned every two months in a dishwasher or manually with the use of a mild
detergent or liquid soap.
2. Replacement
To dismantle the lters:
a) Remove the lower cover by releasing the catch.
b) Take out the aluminum anti-grease lter.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 523.90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 523.90 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info