539712
62
Zoom out
Zoom in
Previous page
1/68
Next page
62
Installing the wall hanger
1. Mark a vertical line on the wall indicating the center of the kitchen plate.
2. Place the cooker hood hanger D (g. 3) against the wall and place it symmetrically to
the middle line, the distance between the holes of the cooker hood hanger D and the
heating plate should be at least 960 mm, initially level the hanger; mark the position of
the assembly holes on the wall.
3. Drill the holes marked on the wall using a drill with the diameter corresponding to the
enclosed rawlplugs, insert the rawlplugs and x the hanger section to the wall.
Installing the cooker hood
1. Hang the hood body C on the xed cooker hood wall hanger D, level the hood using
the screws J and tighten the screw I to protect the cooker hood from sliding down.
2. If required, install and appropriate duct extracting air to the ventilation duct.
3. Install the upper A and lower B chimney masking cover onto the hanging cooker
hood.
4. Slide the upper chimney A masking cover to the desired height, mark its maximum
span on the middle line, remove the masking cover column.
5. Place the upper chimney A masking cover hanger E to against the middle line 65 mm
from the marked maximum point, mark the assembly holes on the wall and install the
hanger according to the picture. If required, install the air n F (g. 4) using the same
assembly screws.
6. Re-install the masking cover column and x it to the cooker hood body and the gen-
eral section using appropriate screws.
7. Plug in the cooker hood.
Plug in and operation control
After plugging the appliance in (according to the previously described requirements),
check if the cooker hood lighting works and if its motor operates correctly.
After installing the cooker hood, the socket should be easily accessible in order to unplug
the appliance.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 523.90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 523.90 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info