Manual Zelmer 41Z012 (page 27 of 28) (English, Polish)

538929

Zoom out

Zoom in

1/28

27GW41-004_v02

Appliance controls and indicators

Hob plate

Plate Hot indicator

Child Lock button

Temp. selection button

LED display showing the level of power (100, 300, 600, 800, 1000, 1400, 1700, 2000)

or temperature (60, 120, 140, 160, 180, 200, 220, 240) or appliance working time

(00:00 – 23:59)

+/– buttons for setting the level of power, temperature or time

Power selection button

Time selection button

ON/OFF button

Connecting to the electricity supply

Place a suitable pan on the hob plate.

After plugging the induction hob in you will hear a single warning sound. At the same

time, all function indicator lamps and heat power lamps will light for a period of about

1 second, and then they will go out. The “ON/OFF” indicator lamp will ash. The “ON/OFF”

button is the only operable button, the remaining buttons are inoperable.

When the appliance is plugged in, press the “ON/OFF” button. You will hear a single

warning sound and the display will read “ ”. The electric fan is turned off, which

means that the appliance is in the standby mode.

Within one minute after pressing the “ON/OFF” button you can select the desired

function. The selected function will be highlighted on the display. If no function has been

selected within one minute, the appliance will be automatically turned off.

If, after selecting the desired function, no pan has been placed on the hob plate,

a warning beep will sound.

The symbol “ ”. will appear on the display. The function indicator lamp will light steadily

while the heat power lamps will ash. If, within one minute, there is still no pan on the hob

plate, the appliance will be automatically turned off. If, within one minute, a pan is placed

on the hob plate, the appliance will check whether the pan is suitable for induction cooking

and after three seconds it will start to perform the cooking function set earlier.

Operation

For each function described below, always use a pan suitable for induction

cooking. The pan base diameter should be 12-24 cm.

Place the pan with food centrally onto the ceramic plate of the induction hob. After

plugging the appliance in all indicator lamps will light for a second and the four-digit display

will show “ ”, and then it will start to ash with the code “ ”. The “ON/OFF”

indicator lamp ashes, which means that the induction hob has not been turned on yet.

If, within 1 minute after pressing the “ON/OFF” button for the rst time, either the

“Power” or “Temp” button is pressed, the appliance will check whether there is a pan on

the hob plate.

In the case there is no pan on the hob plate, a warning sound will be heard and the code

“ ” will appear on the display; the induction hob will automatically exit the selected

mode after 1 minute in the case there is no pan on the hob plate, and then it will go in the

standby mode. In the case a pan has been placed on the hob plate within 1 minute, the

induction hob will automatically start working.

Turn off the induction hob when you have nished cooking by pressing the “ON/OFF”

button. After turning the induction hob off and waiting until the fan stops operating, the

appliance can be disconnected from the electricity supply.

When using the induction hob, observe the following guidelines:

The temperature maintenance mode can only be used with one of the following eight

●

“Temp” settings: 60°C, 120°C, 140°C, 160°C, 180°C, 200°C, 220°C and 240°C.

In the temperature maintenance mode the nominal values may differ from the actual

●

values depending on the cookware shape and material.

Pans made of stainless steel type 202 with multiple bottoms are standard cookware to

●

be used with this induction hob. Depending on cookware selection different levels of

heating capacity are achieved.

The power can be set to one of the 8 levels: 100 W, 300 W, 600 W, 800 W, 1000 W,

●

1400 W, 1700 W and 2000 W. The maximum power is achieved in the “Power” mode.

Instructions for particular functions

Power selection mode (“Power”)

After pressing the “Power” button you can select the desired power level, which will be

conrmed by lighting the corresponding indicator lamp.

The default power is set to 800 W. The selected value is shown on the display during the

operation of the induction hob. The power can be set to one of the 8 levels: 100 W, 300 W,

600 W, 800 W, 1000 W, 1400 W, 1700 W and 2000 W. In order to increase the power level,

press the “+” button, to decrease the setting, press “–”.

Plate hot indicator (“Plate Hot ”)

When the temperature exceeds 60°C or the hob induction system is turned off, the “Plate

Hot” indicator will light.

“Child Lock”

In the induction hob working mode (after one of the available functions: ,”Temp”, ”Power”

or ”Time” has been selected), press the “Child Lock” button for 2 seconds, until the

corresponding indicator lamp will light.

After turning this mode on, the induction hob will not react to touching (except for “ON/OFF”

and “Child Lock” buttons. In order to turn the protection off, press the “Child Lock” button

again for 2 seconds, until the corresponding indicator lamp will go out.

Temperature selection mode (“Temp”)

After pressing the “Temp” button, you can select the desired temperature level, which will

be conrmed by lighting the corresponding indicator lamp.

The default temperature is set to 160°C. The selected value is shown on the display during

the operation of the induction hob. The temperature can be set to one of the following

levels: 60°C, 120°C, 140°C, 160°C, 180°C, 200°C, 220°C and 240°C.

Use the “+” and “–” buttons to select the desired temperature value. When you reach

the maximum temperature setting, the “+” button will be disabled. Then, you can only

decrease the temperature setting by pressing the “–” button. When you reach the minimum

temperature setting, the “–” button will be disabled. The highest possible temperature

setting is 240°C, and the power will be automatically adjusted along with the change in

temperature setting.

Countdown mode (“Time”)

After selecting the “Time” mode (countdown) in the “Power” or “Temp” mode, the mode

indicator lamp will start ashing. Select the time period after which the induction hob will

be automatically turned off.

The default setting is 15 minutes (00:15). When the hour digits start ashing, press the “+”

or “–” button to select a value from 0-23; then within 5 seconds after the “Time” button has

been pressed, the minute digits will light while the hour digits will stop ashing.

Each single press of the “+” or “–” button will respectively increase or decrease the set

countdown time by one minute. The minute range is from 00-59. After pressing the “+” or

button for more than 2 seconds, the minute setting will increase or decrease more quickly

without the sound signal.

If the “+” or “–” button has not been pressed within 5 seconds, the countdown setting will be

completed. The mode indicator lamp will stop ashing, and the set time will appear on the

display (the maximum value is 23 hours 59 minutes – 23:59). After nishing the countdown

the multiple sound signal will be heard, the mode indicator lamp will start ashing, and the

fan will continue to operate for a while and then it will be turned off. The mode indicator

lamp will be turned off along with the induction hob.

4 7

3 8

2 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 41Z012 in the language / languages: English, Polish as an attachment in your email.

The manual is 2,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zelmer 41Z012

Zelmer 41Z012 User Manual - English, Polish - 52 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer 41Z012 Manual

Product: