539095
28
Zoom out
Zoom in
Previous page
1/30
Next page
30
Then rinse it under clean running water and dry.
If you left the jug for longer time without cleaning and
some particles glued to the jug inner, use nylon brush.
We do not recommend cleaning the jug
(3), blades (6),
lid (5) and feeder opening stopper (1) in dish washer.
Aggressive cleaning agents applied in such device can
inuence negative the surface conditions.
Clean the outsider of the motor housing
(8) with damp,
gentle cloth.
ATTENTION: Do not immerse the motor housing (10) in
water or other liquid.
Do not clean the outside of the housing
(10) with
aggressive detergents such as emulsion milk or pastes,
etc. They can remove information graphic symbols.
Do not clean the transparent jug
(3) with harsh sponges
or clothes.
After washing dry thoroughly all the parts of the
appliance.
Disassembling of the cutting unit
Disconnect the plug of the supply cord from the mains
supply outlet.
Empty the blender jug
(3).
Remove the lid
(5) from the blender jug (3). Turn the
blender jug (3) „upside down” and place it on the at, rm
surface.
Hold the blender jug with one hand
(3), and rotate the
blade unit (in clockwise direction).
Remove carefully the blade unit
(6) including the
gasket (8).
ATTENTION: The blades are sharp. Handle them
carefully.
Assembling of the cutting unit
Assemble the gasket
(8) on the blade unit ange (6).
Remove the lid
(5) from the blender jug (3). Turn the
blender jug (3) „upside down” and place it on the at, rm
surface.
Insert the blade unit
(6) into the inlet on the bottom of the
blender jug (3).
Lock the blade unit
(6) rotating it counterclockwise until
it moves.
Ecology – environment protection
Each user can protect the natural environment. It is neither
difcult nor expensive.
In order to do it: put the cardboard packing into
recycling paper container; put the polyethylene
(PE) bags into container for plastic.
When worn out, dispose the appliance to
particular disposal centre, because of the
dangerous elements of this appliance, which
can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 32Z013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 32Z013 in the language / languages: English, Polish as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info