539206
64
Zoom out
Zoom in
Previous page
1/68
Next page
64 GW23-002_v03
7. Replace a worn out HEPA lter (1). To disman-
tle the lter, see point 1–4. Take the new HEPA
lter out of the plastic bag and insert it into the
air cleaner with the arrow pointing inward (see
picture).
8. After installing the pre-lter and the HEPA lter,
insert the top of the inlet grill (2) rst and then
snap in the lower part of the grill (2).
NOTICE: It is recommended to wear gloves while discarding the used lter. Place
the used lter in a plastic bag to prevent dust from re-entering the air. It is impor-
tant to distinguish the front side from the back side of the lter. Change the HEPA
lter (1) when all the bars are lit. If the unit operates in an environment where the
air quality is low, replace the HEPA lter earlier, before all the bars are lit. We rec-
ommended checking the lter every 6 months. Never use a used lter in a reverse
direction, otherwise the dust absorbed will be blown out. A polluted HEPA lter
can not be cleaned, it can only be replaced.
TROUBLESHOOTING
Please check the following items before having the unit repaired.
Problem Reason Solution
The unit does not oper-
ate.
The On/Off button (9) has
not been pressed.
The unit is unplugged.
The air inlet grill (2) has not
been properly installed and
locked into place.
Press the On/Off button (9).
Make use the unit is plugged in.
Make sure the lters are properly
installed and the inlet grill (2) is
installed and locked into place.
Reduce air ow or poor
ltering.
The air inlet (2) or outlet (3)
may be blocked.
The HEPA lter (1) may be
clogged.
Make sure nothing is in front of or
on top of the air purier.
Check the lter with the HEPA lter
replacement indicator and replace it,
if necessary.
The HEPA indication
bars are still lit although
the lter has been
replaced.
The unit has not been
reset.
Switch on the unit, press and hold
the “RESET” button (10) until the
indicator is off.
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 23Z030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 23Z030 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info