539206
62
Zoom out
Zoom in
Previous page
1/68
Next page
62 GW23-002_v03
1. Plug the unit to an electric outlet.
2. Press the On/Off button (9) to start the unit. Repress the button to switch off the unit.
3. After pressing the On/Off button (9) the unit will operate at II speed for about 3 sec-
onds. After about 3 seconds it shall automatically switch to the I speed, unless a differ-
ent speed is selected. Press the “SPEED” button to change the speed. The fan speed
will increase from I to IV. When the maximum speed is reached (IV), the speed shall
start once again to increase from I to IV each time you press the “SPEED” (7) button.
4. During operation you may press the “TIMER” (8) button to set the desired run time
(hours). The value on the display increases in 1 hour increments from 1 to 12. When
the maximum value is reached, the value shall start once again to increase from 1 to
12 each time you press the “TIMER” (8) button. If the operation time of the unit is
not set using the “TIMER” (8) button, the unit shall operate until it is switched off by
pressing the On/Off button (9).
5. Press the “ION” (11) button while the unit is operating to switch on the ionizer. Press
the button again to turn off the ionizer.
6. The appliance is equipped with a HEPA lter replacement indicator (1). When all the
HEPA bars are lit, replace the HEPA lter (1) and switch on the appliance, press and
hold the “RESET” (10) while switching the unit on once again. You will hear three
beeps and the HEPA bars will turn off which means the unit is ready for a new cycle
from the lter.
NOTICE: If the air quality is extremely poor you may replace the HEPA (1) lter be-
fore all the bars are lit. If so, press and hold the RESET (10) button for 3 seconds
until you hear three consecutive beeps, then all the bars are off and the unit is
ready for a new cycle from the lter.
LED display
12. SPEED indicator.
13. “TIMER” indicator.
14. “ION” indicator.
15. HEPA lter replacement indicator.
SPEED indicator (12)
The speed of the air purier ranges from I to IV. The speed of the unit is indicated on the
display by means of vertical bars. The rst bar is lit when the unit is operating on I speed.
Two lit bars indicate that the unit is operating on II speed, three lit bars indicate the III
speed. When all four bars are lit, the unit is operating on the highest, IV speed.
TIMER indicator (13)
The digits of the timer from 1 to 12 indicate the number of hours preset. Once the time is
set, the timer will start to count down until zero. Then the unit will turn off automatically.
“ION” indicator (14)
All four symbols light when the ionizer is working, they switch off when the ionizer stops
working.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 23Z030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 23Z030 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info