538892

Zelmer 13Z011 Manual

222
Zoom out
Zoom in
Previous page
1/228
Next page
222
16.6 Setting the water hardness
The descaling frequency is determined automatically on the basis of the use and water fl ow in the coffee maker. It may be
also adjusted to the water hardness. The coffee maker can be adjusted, to adapt it to the water hardness level. The water
hardness scale is from 1 to 4.
When the appliance is ready to use the message READY TO BREW appears on the display. To set the water hardness,
proceed according to the algorithm below.
The default setting is 3.
To determine the water hardness level, the user may perform a test using a tester included in the coffee maker set. Dip the
tester in water for 1 second. Take out the tester, shake off the water excess and read off the result after about 1 minute.
A dry tester has 4 green squares. After dipping the tester into water, the squares will change the color into pink. The
number of pink squares indicates the water hardness level 1, 2, 3 or 4.
On the basis of the obtained results, set the water hardness level in the coffee machine according to the above algorithm.
16.7. Descaling
This function allows to remove limestone residue from the coffee maker by using an integrated program. After using a cer-
tain amount of water determined by the water hardness level, the message DESCALING will appear on the LCD display
next to the messages connected with the use of the coffee maker. You can descale the appliance now or a t a later time.
However, remember that the message DESCALING will not disappear from the display until the full descaling process is
performed.
If the water hardness level is 1, the message DESCALING will appear after using about 60 l of water.
If the water hardness level is 2, the message DESCALING will appear after using about 50 l of water.
If the water hardness level is 3, the message DESCALING will appear after using about 40 l of water.
If the water hardness level is 4, the message DESCALING will appear after using about 30 l of water.
When the appliance is ready to use the message READY TO BREW appears on the display. To prepare the coffee maker
to the descaling process, proceed according to the algorithm below.
The message PERCENT indicates the amount of water that has been used from the last descaling process. If the dis-
played value amounts to 100%, the user has to perform the descaling process.
The message PROCESSES indicates the amount of descaling processes performed so far.
The message ON means: start the descaling process.
… 222 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 13Z011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 13Z011 in the language / languages: English, Polish as an attachment in your email.

The manual is 15,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info