24681
106
Zoom out
Zoom in
Previous page
1/108
Next page
106
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning,
make a note of the model, serial number and
purchase date of your machine: the Service Centre
will require this information.
M
o
d
.
..
....
....
P
r
o
d
. N
o
. ........
...
S
e
r
. N
o
.
.........
P0042N
Mod. ..........
Prod. No. ...........
Ser. No. .........
Problem Possible cause
Water is not visible in the machine:
The machine, which is the result of modern
technology, runs in a very economical way with
low water consumption. Performance is
nevertheless excellent.
The machine vibrates or is noisy:
The transit bolts and packing have not been
removed.
The support feet have not been adjusted.
The laundry is not evenly distributed in the drum.
Maybe there is very little laundry in the drum.
The door will not open:
The water level is above the bottom edge of the
door.
The machine is heating the water.
The drum is turning.
The door could be opened only when «Door
openable» message appears in the display and
the door locked light has gone off.
Spinning starts late or the machine
does not spin:
The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and
normal spinning can resume. If, after 10 minutes,
the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case,
redistribute the load manually and select the spin
programme.
Unsatisfactory washing results:
Too little or too much detergent has been used.
An unsuitable detergent has been used.
Stubborn stains have not been treated prior to
washing.
The correct programme/temperature was not
selected.
Excessive laundry load.
The machine makes an unusual noise:
The machine is fitted with a commutator motor
which improves machine performance.
132980490GB.qxd 06/07/2006 18.32 Pagina 106
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZWF1650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZWF1650 in the language / languages: English, French, Italian as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info