24681
105
Zoom out
Zoom in
Previous page
1/108
Next page
105
ENGLISH
Something not working?
Problems which you can resolve yourself.
During machine operation it is possible that one of the following messages appears on the display and at the
same time an acoustic signal will sound:
Problem with the water supply ......“No incoming water. Check tap & hose”
Problem with water draining ..........“No drain. Check drain hose /filter”
Door open ......................................“Door not closed. Please check”
Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after
all checks, the problem persists, contact your local Service Centre.
Problem
Possible cause
The machine does not start up:
The door is not firmly closed.(Door not closed.
Please check)
The machine is not plugged in or there is no power
at the socket.
The main fuse has blown.
The Start/Pause button has not been depressed.
The Delay Start option has been selected.
The machine does not fill:
The water tap is closed. (No incoming water.
Check tap & hose)
The inlet hose is squashed or kinked. (No
incoming water. Check tap & hose)
The filter in the inlet hose is blocked. (No
incoming water. Check tap & hose)
The door is not properly closed. (Door not
closed. Please check)
The machine fills then empties
immediately:
The end of the drain hose is too low. Refer to
relevant paragraph in “water drainage” section.
The machine does not empty and/or
does not spin:
The drain hose is squashed or kinked.
The RINSE HOLD option , NIGHT CYCLE or
NO SPIN «O» has been selected.
The drain pump is clogged. (No drain. Check
rain hose /filter)
There is water on the floor:
Too much detergent or unsuitable detergent
(creates too much foam) has been used.
Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.
The drain hose is damaged.
The cap on the emergency emptying hose has not
been replaced after cleaning the filter.
The pump has not been fully screwed in after
cleaning.
132980490GB.qxd 06/07/2006 18.32 Pagina 105
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZWF1650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZWF1650 in the language / languages: English, French, Italian as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info