Manual Zanussi ZTE 170 (page 13 of 58) (German)

69302

Zoom out

Zoom in

1/58

the machine is per-

forming the count-

down, after having

done so and having

closed the door, press

START/PAUSE

again, in order to

allow the machine to

complete the remain-

ing countdown time.

Indicator lights

These lights indicate

the following func-

tions:

• Drying light

This light indicates

that the appliance

is in the drying

phase.

• End of pro-

gramme light

This light is on at

the end of the

cooling phase,

during the anti-

creasing phase

and at the end of

the programme.

• Water reservoir

full light

This light indicates

that the appliance

is in the drying

phase.

This light comes

on at the end of

the programme to

remind you that

the water reser-

voir must be emp-

tied out. If this

light illuminates

during a pro-

gramme this

means that the

water reservoir is

full. The buzzer

sounds, the pro-

gramme stops,

the light of the

Start/Pause

button flashes.

This light comes

on also when the

water reservoir is

not inserted cor-

rectly.

• Filter cleaning

This light illumi-

nates at the end

of the programme

to remind you that

the filters must be

cleaned.

• Condenser

cleaning

It comes on every

80 cycles to

remind you that

the condenser

must be cleaned.

Cancelling a

programme

Turn the selector dial

to “O” to cancel a pro-

gramme which is run-

ning. Now you can

select a new pro-

gramme.

At the end of the

programme

If the laundry is not

removed at the end of

the cycle, the dryer

performs an anti-

creasing phase (dura-

tion: 30 minutes maxi-

mum).

If you do not remove

the laundry, the dryer

will stop automatically

at the end of the anti-

creasing phase.

Lights End/Anticrease

, and remain lit

and the buzzer

sounds for 2 minutes.

Turn the programme

selector dial to “O” to

switch the machine

off. Remove the laun-

dry from the drum and

carefully check that

the drum is empty.

If you do not intend to

carry out another

wash, close the water

tap. Leave the door

open to prevent the

formation of mildew

and unpleasant

smells.

Turn the programme

selector dial to “O”; all

the lights go out. The

appliance is switched

off.

Remove the laundry.

If you open and then

close the door before

turning the selector

dial to “O” all the

lights corresponding

to the phases making

up the performed pro-

gramme come on.

After each use

• Clean the filters.

• Empty the water

reservoir.

Important!

If the drying pro-

gramme has to be

stopped before it

reaches the end, we

recommend that you

turn the programme

selector dial to posi-

tion Cooling and

wait until the end of

this cooling phase

before removing the

laundry. This will

avoid a build-up of

heat inside the appli-

ance.To do this first

turn the dial to “O”

and then to Cooling

and depress Start but-

ton.

Modifying

the programme

To change a pro-

gramme which is run-

ning, first cancel it by

turning the pro-

gramme selector dial

to “O”. Select the new

programme and press

the Start button.

125987771 EN_1.qxp 2007-07-13 09:38 Page 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZTE 170 in the language / languages: German as an attachment in your email.

The manual is 2,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZTE 170

Zanussi ZTE 170 User Manual - Dutch, French - 50 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZTE 170 Manual

Product: