Manual Zanussi ZTE 170 (page 12 of 58) (German)

69302

Zoom out

Zoom in

1/58

Buzzer

When the drying cycle

has finished, an inter-

mittent audible signal

will sound.

By depressing this

button the acoustic

signal is switched off

in the following cases:

• when selecting

the programme

• when depressing

the buttons

• when the pro-

gramme selector

dial is turned to

another position

during the pro-

gramme or when

you depress an

option button dur-

ing the cycle

• at the end of the

programme.

The corresponding

light comes on.

Start/Pause

Press this button to

start the dryer after

having selected the

programme and the

options. The relevant

light will stop flashing.

If the programme

selector dial is turned

to another position,

when the machine is

running, the buzzer

will sound and the

programme phase

indicator lights will

flash. The drum turns

alternately in both

directions during dry-

ing.

All drying pro-

grammes end with a

10 minute cooling

phase (light Cooling is

on). You may remove

the laundry after this

phase.

The display will show

the symbol Long

Anticrease , and

and

illuminate and the

buzzer sounds.

If the door of the

appliance or the small

door at the bottom is

opened while the pro-

gramme is running,

this button must be

pressed again after

closing the door in

order to restart the

programme from the

point at which it was

interrupted. This but-

ton must be

depressed also after a

power failure and

after having reinserted

the water reservoir, if

it has been emptied in

the middle of a pro-

gramme after lighting

up of light .

In both cases the light

of the Start/Pause

button flashes to

remind you that the

start button needs to

be pressed again.

Delay Start

This button allows you

to delay the starting of

the programme by 3,

6 or 9 hours.

Press the button until

the light relevant to

the desired delay

lights up. This option

must be selected after

having selected the

programme and

before 3 6 9 pressing

START/PAUSE to

start the programme.

The machine begins

the countdown, which

is shown by the pilot

lights. For example, if

you have chosen a 9-

hour delay (pilot light

9h lit), after 3 hours,

9h goes out and 6h

lights up; after 3 more

hours, 6h goes out

and 3h lights up.

When the 9 hours are

over (pilot light 3h off),

the drying cycle

begins. During the

delayed start period, it

is not possible to

change the pro-

gramme or the select-

ed delay. If you wish

to do so, you must

first cancel everything

by rotating the pro-

gramme selector dial

to position “O”.

Select the new pro-

gramme, the options

and the delayed start,

then press

START/PAUSE . If

you wish to change

only the options, this

can be done on condi-

tion that the new

option(s) is(are) com-

patible with the pro-

gramme. Set the

machine to PAUSE by

depressing the rele-

vant button, select the

new option(s) and

depress

START/PAUSE button

again.

If you wish to add

some laundry while

125987771 EN_1.qxp 2007-07-13 09:38 Page 12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZTE 170 in the language / languages: German as an attachment in your email.

The manual is 2,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZTE 170

Zanussi ZTE 170 User Manual - Dutch, French - 50 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZTE 170 Manual

Product: