765999
13
Zoom out
Zoom in
Previous page
1/36
Next page
HOW TO SET: TIME OF DAY
After the first connection to the mains, wait until the
display shows and 12:00. "12" flashes.
1. Press or to set the hours.
2. Press .
3. Press or to set the minutes.
4. Press .
The display shows the new time.
To change the time of day press again and
again until starts to flash.
HOW TO SET: DURATION
1. Set a heating function and temperature.
2. Press again and again until starts to
flash.
3. Press or to set the minutes for
Duration.
4. Press or the Duration starts automatically
after 5 seconds.
5. Press or to set the hours for Duration.
6. Press or the Duration starts automatically
after 5 seconds.
When the set time ends, the signal sounds for 2
minutes. The display shows flashing and time
setting. The oven turns off.
7. Press a sensor field to stop the signal.
8. Turn off the oven.
HOW TO SET: END TIME
1. Set a heating function and temperature.
2. Press again and again until starts to
flash.
3. Press or to set the End Time and press
. First you set the minutes and then the
hours.
When the set time ends, the signal sounds for 2
minutes. The display shows flashing and the
time setting . The oven turns off automatically.
4. Press a sensor field to stop the signal.
5. Turn off the oven.
HOW TO SET: TIME DELAY
1. Set a heating function and temperature.
2. Press again and again until starts to
flash.
3. Press or to setthe minutes for
Duration.
4. Press .
5. Press or to set the hours for Duration.
6. Press .
The display shows flashing .
7. Press or to set the End Time and press
. First you set the minutes and then the
hours.
The oven turns on automatically later on, works for
the set Durationand stops at the set End Time.
When the set time ends, the signal sounds for 2
minutes. The display shows flashing and the
time setting . The oven turns off automatically.
8. Press a sensor field to stop the signal.
9. Turn off the oven.
When the Time Delay function is
turned on, the display shows a symbol
of the heating function, with a dot
and . The dot shows which clock
function is on in the Clock / residual
heat display.
HOW TO SET: SET + GO
You can use the Set + Go function only when the
Duration is set.
1. Set a heating function and temperature.
2. Set the Duration.
3. Press again and again until the display
shows flashing .
4. Press to set the Set + Go function.
The display shows and with an indicator.
This indicator shows which clock function is
activated.
5. Press a sensor field (apart from ON / OFF) to
start the Set + Go function.
HOW TO SET: MINUTE MINDER
1. Press .
The display shows flashing and "00".
2. Press to switch between options. First you
set the seconds, then the minutes and the
hours.
3. Press or to set the Minute Minder and
to confirm.
4. Press or the Minute Minder starts
automatically after 5 seconds.
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZOPXX8K1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZOPXX8K1 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZOPXX8K1

Zanussi ZOPXX8K1 User Manual - German - 40 pages

Zanussi ZOPXX8K1 User Manual - Dutch - 40 pages

Zanussi ZOPXX8K1 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info