Manual Zanussi ZGS 983 ICTX (page 40 of 48) (English, Dutch)

76549

Zoom out

Zoom in

1/48

Building In

These hobs can be inserted in a

built-in kitchen unit whose depth is

between 550 and 600 mm. The hobs

dimensions are shown in Fig. 4.

The edge of the cut out must have a

minimum distance from the rear wall of

55 mm.

If there are side walls, or sides of the

furniture unit near the hob, the cut out

edges must have a minimum distance of

150 mm.

Hanging forniture units or hoods

must be placed at 650 mm. minimum

from the hob (Fig. 5).

Fitting the hob to the worktop

Carry out the building in of the hob

as follows:

1. Place the seals supplied with the hob

on the front edge of the cut out.

Then, place them at 27 mm from the

side edges and at 10 mm from the

rear edge, as shown in the diagram,

taking care that the seals meet

without overlapping.

A = Auxiliary burner

SR= Semi-rapid burner

R = Rapid burner

TC= Triple Crown burner

Fig. 5

Dimensions are given in

millimeters

Fig. 4

894

510

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZGS 983 ICTX in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZGS 983 ICTX Manual

Product: