551947
19
Zoom out
Zoom in
Previous page
1/48
Next page
Important! There are some sounds during
normal use (compressor, refrigerant circulation).
Important! The appliance operates
discontinuously, so the stopping of compressor
does not mean being no current. That is why
you must not touch the electrical parts of the
appliance before breaking the circuit.
Problem Possible cause Solution
The appliance is noisy The appliance is not supported
properly
Check if the appliance stands stable
(all the four feet should be on the
floor)
The compressor operates
continually
The thermostatic control is set in-
correctly
Set a warmer temperature
Doors are not shut properly or do
not close tightly
Check if the doors close well and the
gaskets are undamaged and clean
The door has been opened too fre-
quently
Do not leave the door open longer
than necessary
Large quantities of food to be frozen
were put in at the same time
Wait some hours and then check the
temperature again
Food placed in the appliance was
too warm
Allow food to cool to room tempera-
ture before storing
The room temperature is too high. Decrease the room temperature.
There is too much frost
and ice
Products are not wrapped properly Wrap the products better
Doors are not shut properly or do
not close tightly
Check if the doors close well and the
gaskets are undamaged and clean
The Temperature regulator may be
set incorrectly
Set a warmer temperature
It is too warm in the freez-
er
Temperature regulator may be set
incorrectly
Set a lower temperature
The door does not close tightly or it
is not shut properly
Check if the door closes well and the
gasket is undamaged and clean
Large quantities of food to be frozen
were put in at the same time
Insert smaller quantities of food to be
frozen at any one time.
Food placed in the appliance was
too warm
Allow food to cool to room tempera-
ture before storing.
Products to be frozen are placed
too closely to each other
Place the products in a way so that
cold air could circulate among them
It is too cold inside the
freezer
Temperature regulator may be set
incorrectly
Set a warmer temperature
The appliance does not
work at all. Neither cooling
nor lighting works
Plug is not connected to the mains
socket properly
Connect the mains plug properly
Power does not reach the appliance Try connecting another electrical de-
vice to the power outlet
The appliance is not switched on Switch on the appliance
19
www.zanussi.com
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZFT11101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZFT11101 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info