Manual Zanussi ZFT11101 (page 21 of 48) (English, German, Dutch, French)

551947

Zoom out

Zoom in

1/48

10 mm to allow the door to open enough so

that the shelves can be removed.

Warning!

min.

100 mm

15 mm

It must be possible to disconnect the appliance

from the mains power supply; the plug must

therefore be easily accessible after installation.

Door reversibility

Important! To carry out the following

operations, we suggest that this be made with

another person that will keep a firm hold on the

doors of the appliance during the operations.

To change the opening direction of the door, do

these steps:

1. Remove the plug

from the power socket.

2. Tilt back the appli-

ance carefully so that

the compressor can-

not touch the floor.

3. Unscrew the left

foot.

4. Remove the lower

door hinge by un-

screwing the 2 retain-

ing screws.

5. Remove the hinge

pin from the bottom of

the door.

6. Slot the hinge pin

into the hole in the

hinge plate.

7. Take the door off.

8. Refit the upper

hinge pin into the op-

posite location.

9. Fit the door in place

on the hinge pin.

10. Slot the hinge pin

into the hole in the

hinge plate and relo-

cate the hinge assem-

bly to the opposite lo-

cation and refit using

the retaining screws.

11. Refit the bottom

hinge plate assembly

on the opposite side,

taking care that the

edge of the door is

parallel with the side of

the cabinet.

12. Remove and install

the handle (if foreseen)

on the opposite side.

13. Reposition, level

the appliance, wait for

at least four hours and

then connect it to the

power socket.

Do a final check to make sure that:

• All screws are tightened.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Win-

ter), the gasket may not fit perfectly to the cabi-

net. In that case, wait for the natural fitting of the

gasket.

In case you do not want to carry out the above

mentioned operations, contact the nearest After

Sales Service Force. The After Sales Service

specialist will carry out the reversibility of the

doors at your cost.

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the rating plate correspond

to your domestic power supply.

The appliance must be earthed. The power sup-

ply cable plug is provided with a contact for this

purpose. If the domestic power supply socket is

not earthed, connect the appliance to a sepa-

www.zanussi.com

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZFT11101 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZFT11101 Manual

Product: