Manual Zanussi ZFT 710 W (page 14 of 48) (English, German, Dutch, French)

447616

Zoom out

Zoom in

1/48

2. Make sure that the power plug is not squashed or

damaged by the back of the appliance. A squash-

ed or damaged power plug may overheat and

cause a fire.

3. Make sure that you can come to the mains plug of

the appliance.

4. Do not pull the mains cable.

5. If the power plug socket is loose, do not insert the

power plug. There is a risk of electric shock or

fire.

6. You must not operate the appliance without the

lamp cover

of interior lighting.

• This appliance is heavy. Care should be taken when

moving it.

• Do not remove nor touch items from the freezer com-

partment if your hands are damp/wet, as this could

cause skin abrasions or frost/freezer burns.

• Avoid prolonged exposure of the appliance to direct

sunlight.

•

Bulb lamps

used in this appliance are special pur-

pose lamps selected for household appliances use on-

ly. They are not suitable for household room illumina-

tion.

Caution! Do not place frozen food on the worktop

since cold and vapour may produce water

condensate within its inner side. The resulting drip liquid

may cause malfunctions. Therefore, do not place nor leave

frozen items of any kind on the worktop.

Daily Use

• Do not put hot pot on the plastic parts in the appliance.

• Do not store flammable gas and liquid in the appliance,

because they may explode.

• Do not place food products directly against the air out-

let on the rear wall.

• Frozen food must not be re-frozen once it has been

thawed out.

• Store pre-packed frozen food in accordance with the

frozen food manufacturer's instructions.

• Appliance's manufacturers storage recommendations

should be strictly adhered to. Refer to relevant instruc-

tions.

• Do not place carbonated or fizzy drinks in the freezer

compartment as it creates pressure on the container,

which may cause it to explode, resulting in damage to

the appliance.

• Ice lollies can cause frost burns if consumed straight

from the appliance.

Care and cleaning

• Before maintenance, switch off the appliance and dis-

connect the mains plug from the mains socket.

• Do not clean the appliance with metal objects.

• Do not use sharp objects to remove frost from the ap-

pliance. Use a plastic scraper.

• Never use a hair drier or other heating appliances to

speed up defrosting. Excessive heat may damage the

plastic interior, and humidity could enter the electric

system making it live.

Installation

Important! For electrical connection carefully follow the

instructions given in specific paragraphs.

• Unpack the appliance and check if there are damages

on it. Do not connect the appliance if it is damaged.

Report possible damages immediately to the place you

bought it. In that case retain packing.

• It is advisable to wait at least four hours before con-

necting the appliance to allow the oil to flow back in

the compressor.

• Adequate air circulation should be around the appli-

ance, lacking this leads to overheating. To achieve suf-

ficient ventilation follow the instructions relevant to in-

stallation.

• Wherever possible the back of the product should be

against a wall to avoid touching or catching warm parts

(compressor, condenser) to prevent possible burn.

• The appliance must not be located close to radiators or

cookers.

• Make sure that the mains plug is accessible after the

installation of the appliance.

•

Connect to potable water supply only.

5) If the lamp cover is foreseen.

6) If the lamp is foreseen.

7) If the appliance is Frost Free.

8) If a water connection is foreseen.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZFT 710 W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZFT 710 W Manual

Product: