Manual Zanussi ZDT16002 (page 20 of 56) (English, German, Dutch, French)

551673

Zoom out

Zoom in

1/56

Water hardness

Water softener

adjustment

German

degrees

(°dH)

French

degrees

(°fH)

mmol/l Clarke

degrees

Manual Electronic

11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2

< 4 < 7 < 0.7 < 5

1) Factory position.

2) Do not use salt at this level.

Manual adjustment

1 2

Turn the water hardness

dial to the position 1 or 2.

Electronic adjustment

1. Press the on/off button to activate the appliance.

2. Make sure that the appliance is in setting mode. Refer

to ‘SETTING AND STARTING A PROGRAMME’.

3. Press and hold function buttons (B) and (C) at the

same time until the indicators of function buttons (A),

(B) and (C) flash.

4. Press function button (A).

• The indicators of function buttons (B) and (C) go

off.

• The indicator of function button (A) continues to

flash.

• The acoustic signals operate. Example: five inter-

mittent acoustic signals = level 5.

• The display shows the setting of the water soften-

er. Example:

= level 5.

5. Press function button (A) again and again to change

the setting.

6. Deactivate the appliance to confirm.

Filling the salt container

Caution! Only use dishwasher salt. Other products

can cause damage to the appliance.

Water and salt can come out from the salt container when

you fill it. Risk of corrosion. To prevent it, after you fill the

salt container, start a programme.

Put 1 litre of water in the

salt container (only for the

first time).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZDT16002 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZDT16002 Manual

Product: