551673

Zanussi ZDT16002 Manual

18
Zoom out
Zoom in
Previous page
1/56
Next page
Programme
1)
Degree of soil
Type of load
Programme phases Duration
(min)
Energy
(kWh)
Water
(l)
5
Economy
5)
Normal soil
Crockery and cutlery
Prewash
Wash 50 °C
Rinses
Dry
155-167 0,99-1,04 13-14
6
Delicate
Normal or light soil
Delicate crockery and
glassware
Wash 45 °C
Rinses
Dry
60-70 0,8-0,9 14-15
7
Plate warmer
6)
Rinse 70 °C 30 0,8 4
1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of dishes can change the
programme duration and the consumption values.
2) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out
from the appliance.
Do not use detergent with this programme.
3) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity
of the water, the energy consumption and the programme duration.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
5) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy
consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information.
6) This programme makes the dishes warm before use or removes the dust from dishes not used for a long time.
Do not use detergent with this programme.
Options
Multitab function
Activate this function only when you use the combi deter-
gent tablets.
This function deactivates the flow of rinse aid and salt.
The related indicators are off.
The programme duration can increase.
Activating the multitab function
Activate or deactivate the multitab function before
the start of a programme. You cannot activate or de-
activate this function while a programme operates.
1. Press the on/off button to activate the appliance.
2. Make sure that the appliance is in setting mode. Refer
to ‘SETTING AND STARTING A PROGRAMME'.
3. Press the multitab button, the multitab indicator
comes on.
The function stays on until you deactivate it. Press
the multitab button, the multitab indicator goes off.
If you stop to use the combi detergent tablets, before you
start to use separately detergent, rinse aid and dishwasher
salt, do these steps:
1. Deactivate the multitab function.
2. Set the water softener to the highest level.
3. Make sure that the salt container and the rinse aid
dispenser are full.
4. Start the shortest programme with a rinsing phase,
without detergent and without dishes.
5. Adjust the water softener to the water hardness in
your area.
6. Adjust the released quantity of rinse aid.
Acoustic signals
The acoustic signals operate in these conditions:
• The programme is completed.
• The level of the water softener is adjusted electronical-
ly.
• The appliance has a malfunction.
18
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZDT16002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZDT16002 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info