649494
11
Zoom out
Zoom in
Previous page
1/20
Next page
Door opening and laundry
loading
1. Open the door.
2. Load your laundry
(do not force it in).
Caution! Do not jam
laundry in between
the loading door and rub-
ber seal.
3. Close loading door
securely. Lock must
audibly lock.
Selecting the programme
Turn the programme se-
lector dial to the required
programme. The light
START/PAUSE starts to
flash.
1 2 3 4 5
6
Selecting additional functions
You can choose from the additional functions:
button 1 - DELICATE
button 2 - INTENSIVE
button 3 - ANTI-CREASE
button 4 - BUZZER
button 5 - TIME
button 6 - DELAY START
DELICATE
gentle drying with reduced heat of sensitive fabrics and
temperature-sensitive textiles (e.g. acrylic, viscose)
marked on care label with:
INTENSIVE
If the laundry is still damp after a standard drying pro-
gramme, you can increase the drying result by using
the Intensive function.
ANTI-CREASE
prolongs the anti-crease phase to 90 mins in total. The
laundry remains relaxed and free of creases.
BUZZER
audible confirmation of:
cycle end
anti-crease phase start and end
cycle interruption
•error
TIME
after setting the Time programme. You can select a
programme duration from 10 mins to 2 hrs in 10-mi-
nute steps.
DELAY START
allows to delay the start of a drying programme from
minimum of 30 min. to maximum of 20 hours. Press
the Delay Start button repeatedly until the desired delay
start is shown on the display
Setting child lock
The child lock can be set to prevent a programme being
accidentally started or a programme in operation being
accidentally changed. The child lock function locks all
buttons and the programme selector. The child lock can
be activated or deactivated by holding down the
DELI-
CATE and
INTENSIVE buttons simultaneously for 5
seconds.
Before programme is started: Appliance cannot be used
After programme is started: Programme in operation
cannot be changed
The icon
appears in the display to indicate that the
child safety device is activated.
The child safety device is not deactivated once the pro-
gramme comes to an end.
If you want to set a new programme, you must first deacti-
vate the child safety device.
Starting the programme
Press the Start/Pause button. The programme starts.
The programme progress is shown by elapsing dry time
on the LCD.
Changing programme
To change a programme which is running, first cancel it
by turning the programme selector dial to
OFF. Select
the new programme and press the START/PAUSE button.
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZDC68560W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZDC68560W in the language / languages: English as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info