765929
13
Zoom out
Zoom in
Previous page
1/36
Next page
OFFSOUND CONTROL (DEACTIVATION AND
ACTIVATION OF THE SOUNDS)
Deactivate the hob. Touch for 3 seconds. Touch
for 3 seconds. or comes on. Touch of
the timer to choose one of the following:
- the sounds are off
- the sounds are on.
To confirm your selection wait until the hob
deactivates automatically.
When the function is set to you can hear the
sounds only when:
Minute Minder comes down
Count Down Timer comes down
you put something on the control panel.
HOB²HOOD
It is an advanced automatic function which
connects the hob to a special hood. Both the hob
and the hood have an infrared signal communicator.
Speed of the fan is defined automatically on basis
of mode setting and temperature of the hottest
cookware on the hob. You can also operate the fan
from the hob manually.
For most of the hoods the remote
system is originally deactivated.
Activate it before you use the function.
For more information refer to hood
user manual.
Operating the function automatically
To operate the function automatically set the
automatic mode to H1 – H6. The hob is originally
set to H5. The hood reacts whenever you operate
the hob. The hob recognizes temperature of the
cookware automatically and adjusts the speed of
the fan.
Automatic modes
Automatic
light Boiling1) Frying2)
Mode
H0 Off Off Off
Mode
H1 On Off Off
Mode
H2 3)
On Fan
speed 1 Fan
speed 1
Mode
H3 On Off Fan
speed 1
Automatic
light Boiling1) Frying2)
Mode
H4 On Fan
speed 1 Fan
speed 1
Mode
H5 On Fan
speed 1 Fan
speed 2
Mode
H6 On Fan
speed 2 Fan
speed 3
1) The hob detects the boiling process and acti-
vates fan speed in accordance with automatic
mode.
2) The hob detects the frying process and activates
fan speed in accordance with automatic mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch until you hear a beep and keep it
pressed until you hear the second beep.
3. Touch for 3 seconds until or comes
on.
4. Touch until H and a digit (0 - 6) comes on.
H5 is the default setting.
5. Touch of the Timer to select the desired
mode (H0 - H6). The chosen mode activates
automatically after 10 seconds.
To operate the hood directly on the
hood panel deactivate the automatic
mode of the function.
When you finish cooking and
deactivate the hob, the hood fan may
still operate for a certain period of
time. After that time the system
deactivates the fan automatically and
prevents you from accidental
activation of the fan for the next 30
seconds.
Operating the fan speed manually
You can also operate the function manually. To do
that touch when the hob is active. This
deactivates automatic operation of the function and
allows you to change the fan speed manually.
When you press you raise the fan speed by one.
When you reach an intensive level and press
again you will set fan speed to 0 which deactivates
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZCI69080XE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZCI69080XE in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info