765929

Zanussi ZCI69080XE Manual

11
Zoom out
Zoom in
Previous page
1/36
Next page
OPTIHEAT CONTROL (3 STEP RESIDUAL
HEAT INDICATOR)
WARNING! / / As long as
the indicator is on, there is a risk of
burns from residual heat.
The induction cooking zones produce the heat
necessary for the cooking process directly in the
bottom of the cookware. The glass ceramic is
heated by the heat of the cookware.
The indicators / / appear when a cooking
zone is hot. They show the level of the residual heat
for the cooking zones you are currently using.
The indicator may also appear:
• for the neighbouring cooking zones even if you
are not using them,
• when hot cookware is placed on cold cooking
zone,
• when the hob is deactivated but the cooking
zone is still hot.
The indicator disappears when the cooking zone
has cooled down.
THE HEAT SETTING
Turn the knob for the heating functions to select a
heating function. To deactivate it turn the knob to
the off position .
AUTOMATIC SWITCH OFF
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you activate
the hob,
• you spill something or put something on the
control panel for more than 10 seconds (a pan,
a cloth, etc.). An acoustic signal sounds and the
hob deactivates. Remove the object or clean the
control panel.
• the hob gets too hot (e.g. when a saucepan
boils dry). Let the cooking zone cool down
before you use the hob again.
• you use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
• you do not deactivate a cooking zone or change
the heat setting. After some time comes on
and the hob deactivates.
The relation between the heat setting and the
time after which the hob deactivates:
Heat setting The hob deactivates
after
, 1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hour
AUTOMATIC HEAT UP
If you activate this function you can get a necessary
heat setting faster. The function sets the highest
heat setting for some time and then decreases to
the correct heat setting.
To activate the function a cooking zone
must be cold.
To activate the function for a cooking zone:
turn the knob for a cooking zone to the position.
shows on the display. Immediately set the
correct heat setting.
To deactivate the function: turn the knob to the
off position.
POWERBOOST
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for a
limited period of time. After this time the induction
cooking zone automatically sets back to the highest
heat setting.
To activate the function for a cooking zone:
touch . comes on.
To deactivate the function: change the heat
setting.
TIMER
Count Down Timer
You can use this function to set how long the
cooking zone should operate for a single cooking
session.
First set the heat setting for the cooking zone then
set the function.
To set the cooking zone: touch again and
again until the indicator of a necessary cooking
zone comes on.
To activate the function: touch of the timer to
set the time (00 - 99 minutes). When the indicator
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZCI69080XE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZCI69080XE in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info