Manual Zanker ZKK 8416 K (page 26 of 56) (English, German, Dutch, French)

483781

Zoom out

Zoom in

1/56

ca. 50 mm

21 mm

90°

21 mm

90°

Install the part (Ha) on the

inner side of the kitchen

furniture.

Push the part (Hc) on the

part (Ha).

8 mm

Open the appliance door

and the kitchen furniture

door at an angle of 90°.

Insert the small square

(Hb) into guide (Ha).

Put together the appliance

door and the furniture

door and mark the holes.

8 mm

Remove the brackets and

mark a distance of 8 mm

from the outer edge of the

door where the nail must

be fitted (K).

Place the small square on

the guide again and fix it

with the screws supplied.

Align the kitchen furniture

door and the appliance

door by adjusting the part

Hb.

Press the part (Hd) on the

part (Hb).

Do a final check to make sure that:

• All screws are tightened.

• The magnetic sealing strip is attached tightly to the

cabinet.

Important! If the ambient temperature is low (for

example, in the Winter), the size of the gasket

decreases. The size of the gasket increases when the

ambient temperature increases.

Environmental concerns

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by

inappropriate waste handling of this product. For more

detailed information about recycling of this product,

please contact your local council, your household waste

disposal service or the shop where you purchased the

product.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanker ZKK 8416 K in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanker ZKK 8416 K Manual

Product: