Manual Zanker ZKK 8416 K (page 25 of 56) (English, German, Dutch, French)

483781

Zoom out

Zoom in

1/56

If necessary cut the adhe-

sive sealing strip and then

apply it to the appliance

as shown in figure.

Install the appliance in the

niche.

Push the appliance in the

direction of the arrows (1)

until the upper gap cover

stops against the kitchen

furniture.

Push the appliance in the

direction of the arrows (2)

against the cupboard on

the opposite side of the

hinge.

44mm

4mm

Adjust the appliance in the

niche.

Make sure that the dis-

tance between the appli-

ance and the cupboard

front-edge is 44 mm.

The lower hinge cover (in

the accessories bag)

makes sure that the dis-

tance between the appli-

ance and the kitchen furni-

ture is correct.

Make sure that the clear-

ance between the appli-

ance and the cupboard is

4 mm.

Open the door. Put the

lower hinge cover in posi-

tion.

Attach the appliance to

the niche with 4 screws.

Remove the correct part

from the hinge cover (E).

Make sure to remove the

part DX, in the case of

right hinge, SX in opposite

case.

Attach the covers (C, D) to

the lugs and the hinge

holes.

Install the vent grille (B).

Attach the hinge covers

(E) to the hinge.

Connect the appliance lat-

erally to the kitchen furni-

ture sidewall:

1. Loosen the screws of

the part (G) and move

the part (G) till the fur-

niture sidewall.

2. Tighten the screws of

the part (G) again.

3. Attach the part (H) to

the part (G).

Disconnect the parts (Ha),

(Hb), (Hc) and (Hd).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanker ZKK 8416 K in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanker ZKK 8416 K Manual

Product: