Manual Zanker ZKE320X (page 17 of 40) (English, German, Dutch, French)

529001

Zoom out

Zoom in

1/40

• Make sure that the rated voltage and type of power

on the rating plate agree with the voltage and the

power of the local power supply.

• This appliance is supplied with a mains cable. It has

to be supplied with a correct plug, able to support the

load marked on the rating plate. The plug has to be

fitted in a correct socket.

• Any electrical component must be installed or re-

placed by the Service Force Centre technician or

qualified service personnel.

• Always use a correctly installed shockproof socket.

• Make sure that there is an access to the mains plug

after installation.

• Do not pull the mains cable to disconnect the appli-

ance. Always pull the mains plug.

• The appliance must not be connected with an exten-

sion cable, an adapter or a multiple connection (risk

of fire). Check that the ground connection is in con-

formity with the standard and regulations force.

• The power cable must be placed in such a way that

it does not touch any hot part.

• Connect the appliance to the mains with a device

that lets to disconnect the appliance from the mains

at all poles with a contact opening width of minimum

3 mm, eg. automatic line protecting cut-out, earth

leakage trips or fuse.

• None of a parts of the connection cable can not get a

temperature 90 °C. The blue neutral cable must be

connected to the terminal block label with "N". The

brown (or black) phase cable (fitted in the terminal

block contact marked with "L") must always be con-

nected to the live phase.

Replacement of the connection cable

To replace the connection cable use only H05V2V2-F

T90 or equivalent type. Make sure that the cable sec-

tion is applicable to the voltage and the working tem-

perature. The yellow/green earth wire must be approxi-

mately 2 cm longer than the brown (or black) phase

wire.

Assembly

40-50 mm

55 mm

30 mm

min. 650 mm

490 mm

min. 100 mm

270 mm

If several 30 cm hobs are to be installed side by side

into the same cut out, an assembly kit including a sup-

port side bracket and supplementary seals is available

at our Service Centres. The relevant installation instruc-

tions are supplied within the kit package.

A — seal to remove

B — supplied brackets

Caution! Install the appliance only on a worktop

with flat surface.

Possibilities for insertion

Kitchen unit with door

The panel installed below the hob must be easy to re-

move and let an easy access in case a technical assis-

tance intervention is necessary.

min 20 mm

(max 150 mm)

30 mm

60 mm

a) Removable panel

b) Space for connections

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanker ZKE320X in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanker ZKE320X Manual

Product: