528942
27
Zoom out
Zoom in
Previous page
1/32
Next page
Unscrew the three bolts
with the supplied span-
ner.
Slide out the relevant
plastic spacers.
Open the porthole and
remove the polystyrene
block fitted on the door
seal.
Fill the smaller upper
hole and the two large
ones with the corre-
sponding plastic plug
caps supplied in the bag
containing the instruction
booklet.
Positioning
Install the machine on a flat hard floor. Make sure that
air circulation around the machine is not impeded by
carpets, rugs etc. Check that the machine does not
touch the wall or other kitchen units. Level the washing
machine by raising or lowering the feet. The feet may
be tight to adjust as they incorporate a self locking nut,
but the machine MUST be level and stable.
Any necessary adjustment can be made with a span-
ner.
Accurate levelling prevents vibration, noise and dis-
placement of the machine during operation. Never
place cardboard, wood or similar materials under the
machine to compensate for any unevenness in the
floor.
If necessary, check the
setting with a spirit level.
Water inlet
Caution!
This appliance must be connected to a cold
water supply
Before connecting up the appliance to new pi-
pework or to pipework that has not been used
for some time, run off a reasonable amount of
water to flush out any debris that may have
collected
Do not use the hose from your previous appli-
ance to connect to water supply.
The inlet hose is supplied with the appliance and can
be found inside the machine drum.
35°
45°
Open the porthole and extract the inlet hose.
Connect the hose with the angled connection to the
machine. Do not place the inlet hose downwards. An-
gle the hose to the left or right depending on the posi-
tion of your water tap.
Set the hose correctly by loosening the ring nut.
Connect the hose to a
tap with a 3/4” thread.
27
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker WTF968A.8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker WTF968A.8 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanker WTF968A.8

Zanker WTF968A.8 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info