528942
25
Zoom out
Zoom in
Previous page
1/32
Next page
Problem Possible cause/Solution
Spinning starts late or the ma-
chine does not spin:
The electronic unbalance detection device has cut in because the laundry
is not evenly distributed in the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several times before the unbalance
disappears and normal spinning can resume. If, after 10 minutes, the laun-
dry is still not evenly distributed in the drum, the machine will not spin. In
this case, redistribute the load manually and select the spin programme.
Redistribute the laundry.
The load is too small.
Add more items, redistribute the load manually and then select the spin-
ning programme.
The machine does not dry or
does not dry properly:
The drying time has not been selected.
Select the drying time.
The water tap is not turned on.
Open the water tap.
The drain filter is clogged.
Clean the drain filter.
The machine is overloaded.
Reduce the laundry load.
The selected drying time or the drying programme was not suitable for the
laundry.
Select the suitable drying time/programme for the laundry.
The machine makes an unusual
noise:
The machine is fitted with a type of motor which makes an unusual noise
compared with other traditional motors. This new motor ensures a softer
start and more even distribution of the laundry in the drum when spinning,
as well as increased stability of the machine.
No water is visible in the drum:
Machines based on modern technology operate very economically using
very little water without affecting performance.
The display shows the alarm
code EF0:
Anti-flooding system has activated.
Disconnect the appliance, close the water tap and contact the Service
Force Centre
The display shows the alarm
code EC1:
The inlet valve is blocked.
Pull out the plug from the power socket, close the water tap and contact
the Service Force Centre.
The laundry is full of different
colored fluff: :
The fabrics washed in the previous cycle released fluff of a different color .
The drying phase helps to eliminate some fluff.
Clean the clothes with a fluff remover.
In case of an excessive amount of fluff in the drum run the special pro-
gramme to clean it (refer to “FLUFF IN THE FABRICS” for more details).
25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker WTF968A.8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker WTF968A.8 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanker WTF968A.8

Zanker WTF968A.8 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info