528942
17
Zoom out
Zoom in
Previous page
1/32
Next page
Select the Delay Start by pressing button 8
Before you start the programme, if you wish to delay
the start, press this button to select the desired delay.
The selected delay time value will appear on the dis-
play for a few seconds, then the duration of the pro-
gramme will appear again.
You must select this option after you have set the pro-
gramme and before you start the programme.
You can cancel or modify the delay time at any mo-
ment, before you press button 7.
Selecting the delay start :
1. Select the programme and the required options.
2. Select the delay start by pressing button 8.
3. Press button 7:
- the machine starts its hourly countdown.
- the programme will start after the selected delay
has expired.
Cancelling the Delay Start after having started the pro-
gramme:
1. Set the washing machine to PAUSE by pressing
button 7.
2.
Press button 8 once. On the display will appear
'.
3. Press button 7 again to start the programme.
Important!
The selected delay can be changed only after select-
ing the washing programme again.
The door will be locked throughout the delay time. If
you need to open the door, you must first set the
washing machine to PAUSE by pressing button 7
and wait a few minutes before opening the door. Af-
ter you have closed the door, press the same button
again.
Important! The Delay Start cannot be selected with
the draining programme.
Altering an option or a running programme
It is possible to change some options before the pro-
gramme carries them out.
Before you make any change, you must pause the
washing machine by pressing button 7.
Changing a running programme is possible only by re-
setting it. Turn the programme selector dial to
and
then to the new programme position. Start the new pro-
gramme by pressing button 7 again.
The washing water in the tub will be not emptied out.
Interrupting a programme
Press the button 7 to interrupt a programme which is
running, the corresponding pilot light starts blinking.
Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to
to cancel a programme
which is running. Now you can select a new pro-
gramme.
Opening the door after the programme has started
First set the machine to pause by pressing the button 7.
If the pilot light 9 goes off, the door can be opened.
If the pilot light 9 remains lit, this means that the ma-
chine is already heating or that the water level is too
high. In any case, do not force the door!
If you cannot open the door but you need to open it,
switch the machine off by turning the selector dial to
. After a few minutes the door can be opened.
(Pay attention to the water level and temperature!).
After closing the door, it is necessary to select the pro-
gramme and options again and to press button 7.
At the end of the programme
The machine stops automatically. The blinking
ap-
pears on the display, the pilot light of button 7 and the
pilot light 9 go off.
If a programme or an option that ends with water left in
the tub has been selected, the pilot light 9 remains on
and the door is locked to indicate that the water must
be emptied out before opening the door.
Before you empty out the water, the drum continues to
run at regular intervals until the water draining.
Follow the below instructions to empty out the water:
1.
Turn the programme selector dial to
.
2. Select the draining or spinning programme.
3. Reduce the spin speed if needed, by pressing the
relevant button.
4. Press button 7.
At the end of the programme, the door is released and
can be opened. Turn the programme selector dial to
to switch the machine off.
Remove the laundry from the drum and carefully check
that the drum is empty. If you do not intend to carry out
another wash, close the water tap. Leave the door open
to prevent the formation of mildew and unpleasant
smells.
17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker WTF968A.8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker WTF968A.8 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanker WTF968A.8

Zanker WTF968A.8 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info