528945
19
Zoom out
Zoom in
Previous page
1/60
Next page
Indicators
Salt indicator. It comes on when it is necessary to fill the salt container.
1)
After you fill the container, the salt indicator can stay on for some hours. This does not
have an unwanted effect on the operation of the appliance.
1) When the salt container is empty, the related indicator does not come on while a washing programme operates.
On/off button
Press this button to activate or deactivate the appli-
ance.
Programme indicators A and B
These indicators have also an auxiliary function when
you:
Adjust the level of the water softener.
Activate or deactivate the acoustic signals.
Programme button
With this button you can:
Set a washing programme.
Adjust the level of the water softener.
Activate or deactivate the acoustic signals.
Cancel a washing programme in operation.
Setting mode
The appliance must be in setting mode for these
operations:
To set and start a washing programme.
To adjust electronically the level of the water soften-
er.
To deactivate or activate the acoustic signals.
Activate the appliance. The appliance is in setting
mode when:
All the programme indicators are off.
The end indicator flashes.
Activate the appliance. The appliance is not in
setting mode when:
Only one programme indicator comes on.
It is necessary to cancel the programme to go
back to the setting mode. Refer to 'Setting and
starting a washing programme'.
Acoustic signals
You can hear the acoustic signals in these conditions:
The washing programme is completed.
The appliance has a malfunction.
Factory setting: on.
Deactivating the acoustic signals:
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold the programme button until the pro-
gramme indicator (A) flashes and the programme
indicator (B) comes on.
4. Press immediately the programme button again.
The programme indicator (A) comes on and the
programme indicator (B) starts to flash.
After some seconds, the programme indicator (A)
goes off and the end indicator comes on. The pro-
gramme indicator (B) continues to flash.
5. Press the programme button again, the end indica-
tor goes off. The acoustic signals are deactivated.
6. Deactivate the appliance to confirm.
Activating the acoustic signals:
1. To activate the acoustic signals again, do steps (1)
through (4). The programme indicator (A) goes off
and the end indicator is off. The programme indica-
tor (B) continues to flash.
2. Press the programme button again. The end indi-
cator comes on. The acoustic signals are activated.
3. Deactivate the appliance to confirm.
19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker KDT10000FB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker KDT10000FB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info