Manual Zanker KDT10000FB (page 17 of 60) (English, German, Dutch, French)

528945

Zoom out

Zoom in

1/60

• Do not remove the dishes from the appliance until

the washing programme is completed.

Care and cleaning

• Before you clean the appliance, deactivate it and dis-

connect the mains plug from the mains socket.

• Do not use flammable products or products that can

cause corrosion.

• Do not use the appliance without the filters. Make

sure that the installation of the filters is correct. An

incorrect installation causes unsatisfactory washing

results and damage to the appliance.

• Do not use spray water or steam to clean the appli-

ance. Risk of electrical shock and damage to the ap-

pliance.

Installation

• Make sure that the appliance is not damaged. Do not

install or connect a damaged appliance, contact the

supplier.

• Remove all packaging before you install and use the

appliance.

• Only a qualified person must do the electrical con-

nection, the plumbing and the installation of the ap-

pliance. This to prevent the risks of structural dam-

age or injury.

• Make sure that the mains plug is disconnected from

the mains socket during installation.

• Do not drill into the sides of the appliance to prevent

damage to hydraulic components and electrical com-

ponents.

• Important!Obey the instructions in the template sup-

plied with the appliance:

– To install the appliance.

– To assemble the door panel.

– To connect to the water supply and drain.

• Make sure that the appliance is installed below and

adjacent to safe structures.

Frost precautions

• Do not install the appliance where the temperature is

less than 0 °C.

• The manufacturer is not responsible for frost dam-

age.

Water connection

• Use new hoses to connect the appliance to the water

supply. Do not use used hoses.

• Do not connect the appliance to new pipes or pipes

not used for a long time. Let the water flow for some

minutes, then connect the inlet hose.

• Make sure not to squash or cause damage to the

water hoses when you install the appliance.

• Make sure that the water couplings are tight to pre-

vent a water leakage.

• The first time you use the appliance, make sure that

the hoses do not have water leaks.

• The water inlet hose has a safety valve and a double

sheath with an inner mains cable. There is pressure

in the water inlet hose only when the water flows. If

there is a leak in the water inlet hose, the safety

valve interrupts the flow of water.

– Be careful when you connect the water inlet hose:

– Do not put the water inlet hose or the safety

valve in water.

– If the water inlet hose or the safety valve are

damaged, immediately disconnect the mains

plug from the mains socket.

– Contact the service centre to replace the water

inlet hose with safety valve.

Warning! Dangerous voltage.

Electrical connection

• The appliance must be earthed.

• Make sure that the electrical information on the rat-

ing plate agrees with the power supply.

• Always use a correctly installed shockproof socket.

• Do not use multiple plugs and extension cables.

There is a risk of fire.

• Do not replace or change the mains cable. Contact

the service centre.

• Make sure not to squash or cause damage to the

mains plug and cable behind the appliance.

• Make sure that there is access to the mains plug af-

ter the installation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanker KDT10000FB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanker KDT10000FB Manual

Product: