743393
12
Zoom out
Zoom in
Previous page
1/18
Next page
PG 12
Congratulations, you have successfully
installed your unit.
Please proceed to the OPERATING Guide to
initialize the CT32.
IMPORTANT: If
you have labeled and connected your
wires and followed the correct HVAC setup, and your system
still does not operate,
contact technical support
.
STATEMENT OF USE: This thermostat can be used with
24VAC heating and cooling systems and also millivolt
heating. It is powered by 4AA batteries, 24VAC (C wire),
or 24VAC adapter. It cannot be used with line voltage
HVAC systems. This thermostat is digital and your
desired heat or cool temperatures can easily be set on
the large touch screen with the +/- icons. In COOL and
heat pump operation, an automatic 4 minute off-time protects the compressor from damage.
This thermostat runs on 4AA batteries. The CT32 can be externally powered with a power source rated from
12V to 24V, AC or DC, at 100ma or greater. If used, connect to the C and RH terminals (no polarity). The 24VAC
“C” wire is the other side of the 24VAC heating transformer and can be found where the other thermostat wires
connect at the wall or at the furnace. Do not use the common or ground side of the line voltage.
MODE
button
MENU
button
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Z-Wave CT32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Z-Wave CT32 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info