Manual Yuneec Tornado H920 (page 25 of 39) (English)

633010

Zoom out

Zoom in

1/39

BINDING (SINGLE MODE)

The TORNADO H920 and ST24 have already been bound before leaving production, so

there is no need to bind the aircraft to the ST24 if no gimbal is used. If the GB603 gimbal

is to be attached to the aircraft, both the GB603 and TORNADO H920 need to be bound.

BINDING THE TORNADO H920 AND GIMBAL/GIMBAL CAMERA TO THE ST24

STEP 1) Power on the ST24, press [ ] to go to the main interface. Choose FPV, and

enter Model Select.

STEP 2) The default Model type is Multi-copter, and choose the right configuration

you are using the H920/GB603 and the H920/CGO4. Press OK when a pop-up window

comes out.

STEP 3)

For GB603, switch on the LK58 (the switch is

located between the two antennas) and the camera.

STEP 4) Select System Settings

STEP 5) Switch on the TORNADO H920.Wait until the

Main LED indicator blinks blue, Gimbal roll axis stays

horizontal, one of the LK58 LED indicator solid red and the

other blinking blue (only for GB603). Then it means the

self-inspection of the H920 and the gimbal is complete.

NOTICE: For GB603, the receiver will blink orange quickly if the GB603 is installed a receiver.

Tap the refresh icon and the receiver code of GB603 will be shown on the screen. Do not

choose it to bind.

STEP 6) Lean the H920 in the forward direction twice (45°) until the Main LED

indicator blinks yellow.

STEP 7) Tap the Refresh icon again, and the

codes of the H920 will be shown on screen.

Choose the receiver code and WIFI codes

shown below the MODEL and CAMERA

columns simultaneously, and press Bind.

STEP 8) if it is the first time to bind your LK58

(or CGO4) to the ST24, you need to input the

password: 87654321 (for LK58 ), or 1234567890 (for

CGO4), press OK on the pop-up window to continue.

STEP 9) Wait till the WIFI signal icon appears, Press Camera Select and choose

Panasonic GH4 or Sony α7 for GB603 or CGO4. Press select, then press OK.

NOTICE: If the model chosen has never be bound before, 'NOT CONNECTED' will

display in the MODEL column, and the remote controller can bind any YUNEEC

SR12/24 receiver. If a series of receiver codes display on the screen, it means the

model was bound before and can't be bound to any other receiver. If you want to bind

this model to other receiver,you can press and hold the model icon in the MODEL

SELECT interface till a pop-up window comes out, tap 'Copy', and then select the

model newly created.

CGO4

PADFPVRC

ST24

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Tornado H920

Yuneec Tornado H920 Quick start guide - English - 1 pages

Yuneec Tornado H920 User Manual - English - 39 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yuneec Tornado H920 Manual

Product: