633010
24
Zoom out
Zoom in
Previous page
1/39
Next page
STEP 1) Lift the H920 airframe straight & level, then point the nose towards the north
and hold it in this position for 4 seconds. The LED status indicators will automatically
start to flash red/green/blue quickly. Slowly turn the H920 forward and around 360
degrees (pitch axis) until it is flat again.
STEP 2) Turn the H920 45° to the left and then turn it forward 360° again until it is lying
flat in your hands again.
STEP 3) Turn the H920 45° to the left and then turn it forward 360° again until it is lying flat.
STEP 4) Turn the H920 45° to the left and then turn it forward 360° again until it is lying flat.
STEP 5) Turn the H920 45° to the left and then turn it forward 360° again until it is lying flat.
CAUTION: Steps 1 to 5 should be completed within a time span of 30 seconds in order
to achieve successful calibration.
STEP 6) Place the H920 on the ground and wait a few seconds.
If the calibration has been successful, the flight controller restarts, you will recognize
this when you hear the acknowledgement tone, the same one you hear when you
switch the system on.
IMPORTANT NOTE:
If calibration has failed, you must switch off the aircraft manually
by repeating the calibration process. If the calibration should continue to fail, either
the site of calibration is unsuitable or the compass is defective. Refer to your Yuneec
service center.
STEP 1 STEP 2 STEP 3
STEP 4 STEP 5 STEP 6
22
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado H920 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Tornado H920

Yuneec Tornado H920 Quick start guide - English - 1 pages

Yuneec Tornado H920 User Manual - English - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info