633010
20
Zoom out
Zoom in
Previous page
1/39
Next page
INSTALLING THE GB603 GIMBAL AND CAMERA
FOR THE GH4 CAMERA
STEP 1) Install the Fastening Block to the camera's flash mount.
STEP 2) Plug the HDMI cable into the camera.
STEP 3) Place the Camera Mount with lens frame downward, and fit the GH4 camera
with its lens downward.
NOTICE: Make sure the Camera Battery is fully charged
and the SD card is free of space.
STEP 4) Secure the screw on the top and at the bottom
of the frame to fix the camera on the Camera Mount.
STEP 5) Insert the HDMI cable in the corresponding
port on the camera (the right side of GH4) after
connecting the Shutter cable in the port at the top
left side of the camera through the frame.
NOTICE: It requires securing the fastening screws of
camera lens if the GB603 is with a SONY a7 lens mount frame.
IMPORTANT NOTE: Make sure the white plug (or with LK58 logo) connected to the
port of LK58, and the black one (or with camera logo) is connected to the
camera.When installing the GB603 camera gimbal on the H920 copter, replace the
normal antenna with the mushroom antenna.
Connect the GB603 gimbal to the damping plate on the
H920 by turning the 4 fastening screws in a clockwise
direction, tighten them until they feel secure.
NOTICE: Be sure to mount the GB603 correctly by
positioning the label "FRONT" located on the Yaw/Top
Motor toward the Front of the Aircraft.
18
FOR THE SONY 7 CAMERA
STEP 1) Replace the GH4 camera lens mount
frame with SONY 7 lens mount frame, and
secure the 10 screws on the top and bottom
of the frame to fix the frame.
STEP 2) Install the infrared ray mount device
to the left side of the SONY 7 lens mount
frame, secure the screw on the bottom of the
device, and connect the white connector to
the IR port
STEP 3) Mount the SONY 7CG balancer on
the GB603 as illustrated
STEP 1
STEP 2STEP 3
STEP 4) Install the SONY® 7 camera on the camera mount, there is no need to
connect shutter cable for SONY® 7
NOTICE: If using GB603 camera gimbal without SONY® 7 lens mount frame, only
GH4 camera can be mounted. If using GB603 camera gimbal with SONY® 7 lens
mount frame, both GH4 and SONY® 7 cameras can be mounted.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado H920 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Tornado H920

Yuneec Tornado H920 Quick start guide - English - 1 pages

Yuneec Tornado H920 User Manual - English - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info